Poulan 954570772 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of trac- tor.

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Remove small retainer spring, and remove clutch spring off pulley bolt.

Remove large retainer spring, slide collar off and push housing guide out of bracket.

Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs.

Disconnect front links from deck by removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 15)

Raise attachment lift lever to its highest position.

Slide mower under tractor with deflector shield to right side of tractor.

Lower lift lever to its lowest position.

Connect front links to mower deck and secure with retainer springs..

Connect suspension arms to rear deck brackets and secure with retainer springs.

Connect anti-swaybar to chassis bracket and secure with retainer spring.

Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

SUSPENSION

ENGINE PULLEY

ARMS

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

(BOTH SIDES)

 

 

 

 

LARGE

 

 

HOUSING GUIDE

RETAINER

 

 

 

SPRING

 

 

 

BRACKET

 

DEFLECTOR SHIELD

 

 

 

FIG. 15

18

Image 18
Contents Model NO. PC1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport Before Starting the EngineTo Operate on Hills Towing Carts and Other ATTACH- MentsMowing Tips ADD GasolineTo Start Engine See Fig General Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Muffler CleaningEngine Cooling Fins See Fig Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTo Adjust Brake To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Remove Wheel for Repairs See FigTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Remove CABLES, Reverse OrderInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PC1742STA, Product Number 954 57Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered Pmst Steering Assembly 160367 Spacer Brace Axle 72140618 Engine Optional Equipment Engine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

186890, 954570772 specifications

The Poulan 954570772,186890 is a powerful and efficient replacement trimmer head designed specifically for the needs of both homeowners and professional landscapers. Known for its durability and high performance, this trimmer head is compatible with a range of Poulan and other brand trimmers, making it a versatile choice for various outdoor tasks.

One of the standout features of the Poulan 954570772,186890 is its innovative design which helps streamline the trimming process. The trimmer head is equipped with an easy loading system that allows users to replace the line quickly without the need for specialized tools. This feature saves time and minimizes interruptions during landscaping projects, enabling users to maintain productivity.

The Poulan trimmer head also boasts a dual-line feeding system, which enhances cutting efficiency. The dual-line design ensures optimal coverage, allowing for more precise trimming and the reduction of missed spots. The lines are crafted from heavy-duty materials that resist wear and tear, ensuring longevity and consistent performance even in challenging conditions.

Another notable characteristic of the Poulan 954570772,186890 is its compatibility with a variety of line diameters. This flexibility allows users to choose the appropriate line thickness for their specific trimming needs, whether they are tackling thick grass, weeds, or light brush. The ability to adjust the line diameter improves the versatility of the trimmer head, making it suitable for a wide range of applications.

In terms of construction, the Poulan 954570772,186890 is built to withstand the rigors of outdoor use. The robust materials used in its design are resistant to impact and corrosion, which is essential for equipment that will be exposed to various weather conditions. This durability translates to a long service life, providing excellent value for both occasional users and professionals who rely on their equipment for regular use.

Overall, the Poulan 954570772,186890 trimmer head represents a blend of innovative engineering and practicality. With its easy loading system, dual-line feeding, and durable construction, this trimmer head is an outstanding addition to any landscaping toolkit, delivering the performance and reliability that users demand for their outdoor tasks. It stands out as a dependable choice for anyone looking to maintain their lawns and gardens with efficiency and ease.