Poulan 186890, 954570772 HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig

Page 7

ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

Lift seat pan to raised position.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been com- pleted.

Check engine oil level and fill fuel tank with gasoline.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

Place gear shift lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine.After engine has started, move throttle control to idle position.

Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

Slowly release clutch/brake pedal and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Image 7
Contents Model NO. PC1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills To TransportADD Gasoline Mowing TipsTo Start Engine See Fig Before Each USE MaintenanceLubrication Chart General RecommendationsTractor Engine Spark Plugs CleaningEngine Cooling Fins See Fig MufflerTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigTo Remove Wheel for Repairs See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Attach Jumper CablesTo Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PC1742STA, Product Number 954 57 SchematicElectrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered Pmst Steering Assembly 160367 Spacer Brace Axle 72140618 Engine Optional Equipment 170551 Control Throt /Ch Flag EngineSeat Assembly Wheels & Tires DecalsMower Lift 159460 Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

186890, 954570772 specifications

The Poulan 954570772,186890 is a powerful and efficient replacement trimmer head designed specifically for the needs of both homeowners and professional landscapers. Known for its durability and high performance, this trimmer head is compatible with a range of Poulan and other brand trimmers, making it a versatile choice for various outdoor tasks.

One of the standout features of the Poulan 954570772,186890 is its innovative design which helps streamline the trimming process. The trimmer head is equipped with an easy loading system that allows users to replace the line quickly without the need for specialized tools. This feature saves time and minimizes interruptions during landscaping projects, enabling users to maintain productivity.

The Poulan trimmer head also boasts a dual-line feeding system, which enhances cutting efficiency. The dual-line design ensures optimal coverage, allowing for more precise trimming and the reduction of missed spots. The lines are crafted from heavy-duty materials that resist wear and tear, ensuring longevity and consistent performance even in challenging conditions.

Another notable characteristic of the Poulan 954570772,186890 is its compatibility with a variety of line diameters. This flexibility allows users to choose the appropriate line thickness for their specific trimming needs, whether they are tackling thick grass, weeds, or light brush. The ability to adjust the line diameter improves the versatility of the trimmer head, making it suitable for a wide range of applications.

In terms of construction, the Poulan 954570772,186890 is built to withstand the rigors of outdoor use. The robust materials used in its design are resistant to impact and corrosion, which is essential for equipment that will be exposed to various weather conditions. This durability translates to a long service life, providing excellent value for both occasional users and professionals who rely on their equipment for regular use.

Overall, the Poulan 954570772,186890 trimmer head represents a blend of innovative engineering and practicality. With its easy loading system, dual-line feeding, and durable construction, this trimmer head is an outstanding addition to any landscaping toolkit, delivering the performance and reliability that users demand for their outdoor tasks. It stands out as a dependable choice for anyone looking to maintain their lawns and gardens with efficiency and ease.