Poulan 954570772, 186890 To Start Engine with a Weak Battery See Fig, Replacing Battery See Figs

Page 22

SERVICE AND ADJUSTMENTS

TO START ENGINE WITH A WEAK BATTERY (See Fig. 25)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

REPLACING BATTERY (See Figs. 26 and 27)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

•Lift seat pan to raised position.

•Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

•Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

FIG. 26

TERMINAL

KEPS NUT

COVER

 

HEX

BOLT

FIG. 25

POSITIVE (RED) CABLE

NEGATIVE (BLACK) CABLE

FIG. 27

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model NO. PC1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport Before Starting the EngineTo Operate on Hills Towing Carts and Other ATTACH- MentsADD Gasoline Mowing TipsTo Start Engine See Fig General Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Muffler CleaningEngine Cooling Fins See Fig Spark PlugsTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTo Adjust Brake To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Remove Wheel for Repairs See FigTo Attach Jumper Cables To Start Engine with a Weak Battery See FigReplacing Battery See Figs To Remove CABLES, Reverse OrderInterlocks and Relays To Adjust CarburetorTo Replace Headlight Bulb To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PC1742STA, Product Number 954 57Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered Pmst Steering Assembly 160367 Spacer Brace Axle 72140618 Engine Optional Equipment Engine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

186890, 954570772 specifications

The Poulan 954570772,186890 is a powerful and efficient replacement trimmer head designed specifically for the needs of both homeowners and professional landscapers. Known for its durability and high performance, this trimmer head is compatible with a range of Poulan and other brand trimmers, making it a versatile choice for various outdoor tasks.

One of the standout features of the Poulan 954570772,186890 is its innovative design which helps streamline the trimming process. The trimmer head is equipped with an easy loading system that allows users to replace the line quickly without the need for specialized tools. This feature saves time and minimizes interruptions during landscaping projects, enabling users to maintain productivity.

The Poulan trimmer head also boasts a dual-line feeding system, which enhances cutting efficiency. The dual-line design ensures optimal coverage, allowing for more precise trimming and the reduction of missed spots. The lines are crafted from heavy-duty materials that resist wear and tear, ensuring longevity and consistent performance even in challenging conditions.

Another notable characteristic of the Poulan 954570772,186890 is its compatibility with a variety of line diameters. This flexibility allows users to choose the appropriate line thickness for their specific trimming needs, whether they are tackling thick grass, weeds, or light brush. The ability to adjust the line diameter improves the versatility of the trimmer head, making it suitable for a wide range of applications.

In terms of construction, the Poulan 954570772,186890 is built to withstand the rigors of outdoor use. The robust materials used in its design are resistant to impact and corrosion, which is essential for equipment that will be exposed to various weather conditions. This durability translates to a long service life, providing excellent value for both occasional users and professionals who rely on their equipment for regular use.

Overall, the Poulan 954570772,186890 trimmer head represents a blend of innovative engineering and practicality. With its easy loading system, dual-line feeding, and durable construction, this trimmer head is an outstanding addition to any landscaping toolkit, delivering the performance and reliability that users demand for their outdoor tasks. It stands out as a dependable choice for anyone looking to maintain their lawns and gardens with efficiency and ease.
Top Page Image Contents