Poulan 954570772, 186890 To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 20

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 20

TO CHECK AND ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 21

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down between transaxle belt keepers and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

20

Image 20
Contents Model NO. PC1742STA Safety Rules Safety Rules Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine See Fig Mowing TipsADD Gasoline Maintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning Engine Cooling Fins See FigMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PC1742STA, Product Number 954 57Electrical KEY Part Description Chassis and Enclosures 5479J Plug Btn Blk Drive Shaft Asm Cross Tapered Pmst Steering Assembly 160367 Spacer Brace Axle 72140618 Engine Optional Equipment Engine 170551 Control Throt /Ch FlagSeat Assembly Decals Wheels & TiresMower Lift 159460 Mower Deck CAB Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation

186890, 954570772 specifications

The Poulan 954570772,186890 is a powerful and efficient replacement trimmer head designed specifically for the needs of both homeowners and professional landscapers. Known for its durability and high performance, this trimmer head is compatible with a range of Poulan and other brand trimmers, making it a versatile choice for various outdoor tasks.

One of the standout features of the Poulan 954570772,186890 is its innovative design which helps streamline the trimming process. The trimmer head is equipped with an easy loading system that allows users to replace the line quickly without the need for specialized tools. This feature saves time and minimizes interruptions during landscaping projects, enabling users to maintain productivity.

The Poulan trimmer head also boasts a dual-line feeding system, which enhances cutting efficiency. The dual-line design ensures optimal coverage, allowing for more precise trimming and the reduction of missed spots. The lines are crafted from heavy-duty materials that resist wear and tear, ensuring longevity and consistent performance even in challenging conditions.

Another notable characteristic of the Poulan 954570772,186890 is its compatibility with a variety of line diameters. This flexibility allows users to choose the appropriate line thickness for their specific trimming needs, whether they are tackling thick grass, weeds, or light brush. The ability to adjust the line diameter improves the versatility of the trimmer head, making it suitable for a wide range of applications.

In terms of construction, the Poulan 954570772,186890 is built to withstand the rigors of outdoor use. The robust materials used in its design are resistant to impact and corrosion, which is essential for equipment that will be exposed to various weather conditions. This durability translates to a long service life, providing excellent value for both occasional users and professionals who rely on their equipment for regular use.

Overall, the Poulan 954570772,186890 trimmer head represents a blend of innovative engineering and practicality. With its easy loading system, dual-line feeding, and durable construction, this trimmer head is an outstanding addition to any landscaping toolkit, delivering the performance and reliability that users demand for their outdoor tasks. It stands out as a dependable choice for anyone looking to maintain their lawns and gardens with efficiency and ease.