Poulan 96042011100, 434534 Service and Adjustments, To Remove Mower See Fig, To Install Mower

Page 21

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress brake pedal fully and set parking brake.

•Place motion control lever in neutral position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 33)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly.

•Remove mower belt from electric clutch pulley (M).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Gotoeithersideofmoweranddisconnectmowersuspen- sion arm (A) from chassis and rear lift link (C) from rear mowerbracket(D)-removeretainerspringsandwashers.

•Go to other side of mower and disconnect the suspen- sion arm and rear lift link.

CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

•From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket.

•Turn tractor steering wheel to the left as far as it will go.

•Slide mower out from under right side of tractor.

TO INSTALL MOWER

Follow procedure described in “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual.

 

L

 

 

B

 

 

 

 

 

M

F

 

 

 

 

 

 

 

 

 

 

E

K

 

 

 

A

 

 

 

 

 

H

 

 

 

 

 

C

D

S

 

 

 

 

C

D

 

 

 

 

 

 

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 34)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

•Remove screws (P) from mandrel covers (Q) and remove covers.

•Removeanydirtorgrassclippingswhichmayhaveaccu- mulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (V).

MOWER DRIVE BELT INSTALLATION

•Install belt around all mandrel pulleys (R) and around idler pulleys (V) as shown.

•Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•Reassemble mandrel covers (Q). Securely tighten all screws.

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Raise attachment lift lever to highest position.

P

P

 

 

 

L

M

P

 

Q

 

K

R

Q

R

V

 

 

R

 

Fig. 33

21

Fig. 34

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PBGT26H54 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Rear 3/16 Lift Link Shoulder Bolt 1/4 O.D Unassembled PartsOil Drain Tube 4 O.DTools Required for Assembly AssemblyToremovetractorfromcarton Before Removing Tractor from SkidInstall ANTI-SWAY BAR S if Equipped See Turn Steering Wheel Left and Position Mower See FigANTI-SWAY BAR S Attach Mower Side Suspension Arms a to Chassis See Fig Attach Rear Lift Links C See FigAttach Front Link E See Fig Check Tire Pressure Install Belt on Engine Clutch Pulley M SeeCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Operate Mower To Stop Mower BladesBefore Starting the Engine Service REMINDER/HOUR MeterTo Operate on Hills Check Engine OIL LevelTo Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig To Install Mower Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See FigTo Level Mower Belt Installation Transaxle Motion Control Lever Neutral Adjustment See FigTo Replace Motion Drive Belt See Fig To Check BrakeReplacing Battery See Fig To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel See FigTransmission Other StorageFuel System Engine OILProblem Cause Correction TroubleshootingBattery will not To run when operFires when turn Engine continuesOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationLimited Warranty

434534, 96042011100 specifications

The Poulan 96042011100,434534 is a powerful and versatile outdoor equipment designed to make yard work efficient and manageable. Known for its robust performance, this machine is a testament to Poulan’s commitment to quality and reliability. It comes equipped with a range of features, technologies, and characteristics that make it stand out in the crowded field of outdoor power tools.

One of the main features of the Poulan 96042011100 is its powerful engine. This model is equipped with a high-performance motor that provides ample power for various yard tasks, including trimming, edging, and maintaining small to medium-sized lawns. The engine is designed for fuel efficiency, allowing users to complete tasks without frequent refueling, which enhances productivity.

The design of the Poulan 96042011100 emphasizes user comfort. It features an adjustable handle that can be modified to suit different user heights and preferences, ensuring that operators can work for extended periods without experiencing discomfort. Additionally, the lightweight construction of the machine makes it easy to maneuver around obstacles in the yard, reducing strain on the user.

In terms of technology, the Poulan 96042011100 utilizes advanced cutting systems that enable clean and precise cuts. The sharp blades are engineered to handle a variety of grass types and thicknesses, making the machine versatile enough to tackle different yard conditions. Furthermore, the easy-start system is a notable feature that promotes hassle-free operation, allowing users to start the machine with minimal effort.

The Poulan 96042011100 also stands out for its safety features. It includes a protective guard that shields the operator from debris and flying grass clippings, significantly enhancing user safety during operation. The machine's design incorporates safety switches to prevent accidental starts, ensuring a safer working environment.

Lastly, durability is a key characteristic of the Poulan 96042011100. Built with high-quality materials, this outdoor equipment is designed to withstand the rigors of outdoor use. Its resilient components ensure that the machine can operate effectively season after season, making it a valuable addition to any homeowner's toolkit.

In summary, the Poulan 96042011100,434534 is a well-rounded outdoor tool that combines power, comfort, and safety features to meet the needs of homeowners and gardeners. Its advanced technologies and durable design make it a reliable choice for maintaining a pristine yard, ensuring a satisfying user experience every time.
Top Page Image Contents