Poulan 96042011100, 434534 manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 9

ASSEMBLY

9INSTALL BELT ON ENGINE CLUTCH PULLEY (M) (See Fig. 7 & 15)

•Disengage belt tension rod (K) from locking bracket (L).

•Install belt onto engine clutch pulley (M).

M

M.ENGINE

CLUTCH PULLEY

Fig. 15

IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers.

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operat- ing mower as shown in the Operation section of this manual.

MOWER DRIVE BELT INSTALLATION

Follow procedure described in “TO REPLACE MOWER BLADE DRIVE BELT ” in the "Service and Adjustments" section of this manual.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before operat- ing your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PBGT26H54 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Rear 3/16 Lift Link Shoulder Bolt 1/4 O.D Unassembled PartsOil Drain Tube 4 O.DTools Required for Assembly AssemblyToremovetractorfromcarton Before Removing Tractor from SkidInstall ANTI-SWAY BAR S if Equipped See Turn Steering Wheel Left and Position Mower See FigANTI-SWAY BAR S Attach Mower Side Suspension Arms a to Chassis See Fig Attach Rear Lift Links C See FigAttach Front Link E See Fig Check Tire Pressure Install Belt on Engine Clutch Pulley M SeeCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Operate Mower To Stop Mower BladesBefore Starting the Engine Service REMINDER/HOUR MeterTo Operate on Hills Check Engine OIL LevelTo Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigEngine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig To Install Mower Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See FigTo Level Mower Belt Installation Transaxle Motion Control Lever Neutral Adjustment See FigTo Replace Motion Drive Belt See Fig To Check BrakeReplacing Battery See Fig To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel See FigTransmission Other StorageFuel System Engine OILProblem Cause Correction TroubleshootingBattery will not To run when operFires when turn Engine continuesOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationLimited Warranty

434534, 96042011100 specifications

The Poulan 96042011100,434534 is a powerful and versatile outdoor equipment designed to make yard work efficient and manageable. Known for its robust performance, this machine is a testament to Poulan’s commitment to quality and reliability. It comes equipped with a range of features, technologies, and characteristics that make it stand out in the crowded field of outdoor power tools.

One of the main features of the Poulan 96042011100 is its powerful engine. This model is equipped with a high-performance motor that provides ample power for various yard tasks, including trimming, edging, and maintaining small to medium-sized lawns. The engine is designed for fuel efficiency, allowing users to complete tasks without frequent refueling, which enhances productivity.

The design of the Poulan 96042011100 emphasizes user comfort. It features an adjustable handle that can be modified to suit different user heights and preferences, ensuring that operators can work for extended periods without experiencing discomfort. Additionally, the lightweight construction of the machine makes it easy to maneuver around obstacles in the yard, reducing strain on the user.

In terms of technology, the Poulan 96042011100 utilizes advanced cutting systems that enable clean and precise cuts. The sharp blades are engineered to handle a variety of grass types and thicknesses, making the machine versatile enough to tackle different yard conditions. Furthermore, the easy-start system is a notable feature that promotes hassle-free operation, allowing users to start the machine with minimal effort.

The Poulan 96042011100 also stands out for its safety features. It includes a protective guard that shields the operator from debris and flying grass clippings, significantly enhancing user safety during operation. The machine's design incorporates safety switches to prevent accidental starts, ensuring a safer working environment.

Lastly, durability is a key characteristic of the Poulan 96042011100. Built with high-quality materials, this outdoor equipment is designed to withstand the rigors of outdoor use. Its resilient components ensure that the machine can operate effectively season after season, making it a valuable addition to any homeowner's toolkit.

In summary, the Poulan 96042011100,434534 is a well-rounded outdoor tool that combines power, comfort, and safety features to meet the needs of homeowners and gardeners. Its advanced technologies and durable design make it a reliable choice for maintaining a pristine yard, ensuring a satisfying user experience every time.
Top Page Image Contents