To Level Mower

SERVICE AND ADJUSTMENTS

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 35)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

NOTE: As desired, you can raise the low side of mower or lower the high side.

•Go to side of mower you wish to adjust.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower the mower, or, to the right to raise the mower.

	A
Turn nut right	Turn nut left
to raise mower	to lower mower

Fig. 35

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 36)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

	02966
A	A

Fig. 36

•If adjustment is necessary, see steps in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 37 & 38) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

Fig. 37

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (tighten) to raise the front of mow- er,or,counterclockwise(loosen)tolowerthefrontmower.

TIGHTEN ADJUST		LOOSEN
		ADJUST NUT
NUT B TO RAISE
		B TO LOWER
MOWER
	02950	MOWER

LOOSEN JAM NUT A FIRST

Fig. 38

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

434534, 96042011100 specifications

The Poulan 96042011100,434534 is a powerful and versatile outdoor equipment designed to make yard work efficient and manageable. Known for its robust performance, this machine is a testament to Poulan’s commitment to quality and reliability. It comes equipped with a range of features, technologies, and characteristics that make it stand out in the crowded field of outdoor power tools.

One of the main features of the Poulan 96042011100 is its powerful engine. This model is equipped with a high-performance motor that provides ample power for various yard tasks, including trimming, edging, and maintaining small to medium-sized lawns. The engine is designed for fuel efficiency, allowing users to complete tasks without frequent refueling, which enhances productivity.

The design of the Poulan 96042011100 emphasizes user comfort. It features an adjustable handle that can be modified to suit different user heights and preferences, ensuring that operators can work for extended periods without experiencing discomfort. Additionally, the lightweight construction of the machine makes it easy to maneuver around obstacles in the yard, reducing strain on the user.

In terms of technology, the Poulan 96042011100 utilizes advanced cutting systems that enable clean and precise cuts. The sharp blades are engineered to handle a variety of grass types and thicknesses, making the machine versatile enough to tackle different yard conditions. Furthermore, the easy-start system is a notable feature that promotes hassle-free operation, allowing users to start the machine with minimal effort.

The Poulan 96042011100 also stands out for its safety features. It includes a protective guard that shields the operator from debris and flying grass clippings, significantly enhancing user safety during operation. The machine's design incorporates safety switches to prevent accidental starts, ensuring a safer working environment.

Lastly, durability is a key characteristic of the Poulan 96042011100. Built with high-quality materials, this outdoor equipment is designed to withstand the rigors of outdoor use. Its resilient components ensure that the machine can operate effectively season after season, making it a valuable addition to any homeowner's toolkit.

In summary, the Poulan 96042011100,434534 is a well-rounded outdoor tool that combines power, comfort, and safety features to meet the needs of homeowners and gardeners. Its advanced technologies and durable design make it a reliable choice for maintaining a pristine yard, ensuring a satisfying user experience every time.