Poulan 96048000500 manual To Replace Mower Blade Drive Belt See Fig, To Check Brake, Belt Removal

Page 21

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 31)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work belt around both mandrel pulleys and idler pulleys.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower (See "To Install Mower" in this section of manual).

MANDRELIDLER

PULLEYPULLEYS

MANDREL

PULLEY

Fig. 31

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 32)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler (A) and clutching idler (B).

•Remove belt from centerspan idler (C).

•Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

•Remove belt downward from engine pulley (E).

•Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

•Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

•Pull belt toward front of tractor and roll belt onto engine pulley (E).

•Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

•Install belt on centerspan idler (C).

•Install belt through stationary idler (A) and clutching idler (B).

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” section in this manual).

 

E

 

F

A

 

B

G

 

C

 

D

02952

Fig. 32

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PB20H42YT Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Tire Pressure AssemblyCheck Deck Levelness Check for Proper Position of BeltsOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorStopping See Fig To USE Throttle Control See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigReverse Operation System ROS To Operate MowerBefore Starting the Engine To Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBlade Removal See Fig Engine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTo Remove Wheel See Fig Front Wheel TOE-IN/CAMBERTransmission Other StorageFuel System Engine OILProblem Cause Correction TroubleshootingTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Limited Warranty

96048000500, 532 43 88-78 specifications

The Poulan 532 43 88-78,96048000500 is an innovative lawn mower accessory designed to enhance lawn maintenance efficiency. Known for its robust build quality and reliability, this piece of equipment is favored by both homeowners and professional landscapers.

One of the standout features of the Poulan 532 43 88-78,96048000500 is its compatibility with a variety of Poulan lawn mowers. This ensures that users can easily integrate this accessory into their existing lawn care systems. The design focuses on versatility, allowing it to work seamlessly with different models, making it a versatile addition to any green space toolkit.

Equipped with a powerful engine, the Poulan 532 features advanced technologies that optimize performance. The cutting system is designed with precision blades that deliver clean and even cuts. This not only enhances the appearance of the lawn but also promotes healthier grass growth by reducing stress on the plants.

Durability is a key characteristic of this product. Constructed from high-grade materials, the Poulan 532 is built to withstand the rigors of regular use. Its rugged design minimizes wear and tear, ensuring longevity and reliability, even in challenging conditions.

This model also incorporates easy-start technology, which allows users to start the machine with minimal effort. This feature is particularly useful for those who may struggle with traditional pull-start mechanisms. Furthermore, the user-friendly controls make operation straightforward, appealing to both novices and experienced users alike.

In addition, the Poulan 532 43 88-78,96048000500 offers adjustable cutting height settings, allowing users to customize the length of grass cut to their preference. This feature grants lawn caretakers the flexibility to maintain their lawns according to seasonal needs or individual aesthetic choices.

Maintenance is made easy with the Poulan 532, thanks to its accessible design. Routine checks and part replacements can be conducted without significant hassle, promoting a longer lifespan for the machine. Users appreciate that they can spend less time on upkeep and more time enjoying their beautifully manicured lawns.

Overall, the Poulan 532 43 88-78,96048000500 stands out in the market for its combination of powerful performance, user-friendly features, and durable construction. Perfect for anyone who values quality lawn equipment, this accessory is sure to meet the demands of modern lawn care while providing exceptional results.
Top Page Image Contents