Poulan 96048000500, 532 43 88-78 manual Transmission

Page 23

SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Fig. 36)

WARNING: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from accidental grounding.

•Lift seat pan to raised position.

•Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

•Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

 

TERMINAL

NUT

COVER

BOLT

 

POSITIVE

NEGATIVE

(RED)

(BLACK)

CABLE

CABLE

02603

 

Fig. 36

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 37)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02778

Fig. 37

TRANSMISSION

REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and beforeoperating thetractor. See “PURGE TRANSMISSION” in the Operation section of this manual.

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engine manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PB20H42YT II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceIII. Children Table of Contents Before Removing Tractor from Skid Tools Required for AssemblyUnassembled Parts To Remove Tractor from CartonCheck for Proper Position of Belts AssemblyCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor To USE Throttle Control See Fig HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigTo Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig Reverse Operation System ROSBefore Starting the Engine Automatic Transmission Warm UP To Start Engine See FigPurge Transmission Mowing Tips Schedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Engine Deck Washout Port See Fig CleaningIN-LINE Fuel Filter See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig To Remove Wheel See FigTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction TroubleshootingTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Limited Warranty

96048000500, 532 43 88-78 specifications

The Poulan 532 43 88-78,96048000500 is an innovative lawn mower accessory designed to enhance lawn maintenance efficiency. Known for its robust build quality and reliability, this piece of equipment is favored by both homeowners and professional landscapers.

One of the standout features of the Poulan 532 43 88-78,96048000500 is its compatibility with a variety of Poulan lawn mowers. This ensures that users can easily integrate this accessory into their existing lawn care systems. The design focuses on versatility, allowing it to work seamlessly with different models, making it a versatile addition to any green space toolkit.

Equipped with a powerful engine, the Poulan 532 features advanced technologies that optimize performance. The cutting system is designed with precision blades that deliver clean and even cuts. This not only enhances the appearance of the lawn but also promotes healthier grass growth by reducing stress on the plants.

Durability is a key characteristic of this product. Constructed from high-grade materials, the Poulan 532 is built to withstand the rigors of regular use. Its rugged design minimizes wear and tear, ensuring longevity and reliability, even in challenging conditions.

This model also incorporates easy-start technology, which allows users to start the machine with minimal effort. This feature is particularly useful for those who may struggle with traditional pull-start mechanisms. Furthermore, the user-friendly controls make operation straightforward, appealing to both novices and experienced users alike.

In addition, the Poulan 532 43 88-78,96048000500 offers adjustable cutting height settings, allowing users to customize the length of grass cut to their preference. This feature grants lawn caretakers the flexibility to maintain their lawns according to seasonal needs or individual aesthetic choices.

Maintenance is made easy with the Poulan 532, thanks to its accessible design. Routine checks and part replacements can be conducted without significant hassle, promoting a longer lifespan for the machine. Users appreciate that they can spend less time on upkeep and more time enjoying their beautifully manicured lawns.

Overall, the Poulan 532 43 88-78,96048000500 stands out in the market for its combination of powerful performance, user-friendly features, and durable construction. Perfect for anyone who values quality lawn equipment, this accessory is sure to meet the demands of modern lawn care while providing exceptional results.
Top Page Image Contents