Poulan 532 43 88-78 manual Assembly, Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 6

ASSEMBLY

NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Releaseparkingbrakebydepressingclutch/brakepedal.

•Place freewheel control in "transmission disengaged position" (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on sides of tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before operat- ing your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PB20H42YT General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationService III. ChildrenIV. Towing Table of Contents To Remove Tractor from Carton Tools Required for AssemblyUnassembled Parts Before Removing Tractor from SkidCheck Deck Levelness AssemblyCheck Tire Pressure Check for Proper Position of BeltsOperation Know Your Tractor Stopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control See FigReverse Operation System ROS To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate MowerBefore Starting the Engine To Start Engine See Fig Purge TransmissionAutomatic Transmission Warm UP Mowing Tips General Recommendations MaintenanceMaintenance ScheduleBattery TractorBlade Removal See Fig Engine Cleaning IN-LINE Fuel Filter See FigDeck Washout Port See Fig Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Check Brake Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Remove Wheel See Fig Transaxle Motion Control Lever Neutral Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System StorageOther Engine OILTroubleshooting Problem Cause CorrectionTroubleshooting Points Suggested Guide for Sighting Slopes for Safe Operation Limited Warranty

96048000500, 532 43 88-78 specifications

The Poulan 532 43 88-78,96048000500 is an innovative lawn mower accessory designed to enhance lawn maintenance efficiency. Known for its robust build quality and reliability, this piece of equipment is favored by both homeowners and professional landscapers.

One of the standout features of the Poulan 532 43 88-78,96048000500 is its compatibility with a variety of Poulan lawn mowers. This ensures that users can easily integrate this accessory into their existing lawn care systems. The design focuses on versatility, allowing it to work seamlessly with different models, making it a versatile addition to any green space toolkit.

Equipped with a powerful engine, the Poulan 532 features advanced technologies that optimize performance. The cutting system is designed with precision blades that deliver clean and even cuts. This not only enhances the appearance of the lawn but also promotes healthier grass growth by reducing stress on the plants.

Durability is a key characteristic of this product. Constructed from high-grade materials, the Poulan 532 is built to withstand the rigors of regular use. Its rugged design minimizes wear and tear, ensuring longevity and reliability, even in challenging conditions.

This model also incorporates easy-start technology, which allows users to start the machine with minimal effort. This feature is particularly useful for those who may struggle with traditional pull-start mechanisms. Furthermore, the user-friendly controls make operation straightforward, appealing to both novices and experienced users alike.

In addition, the Poulan 532 43 88-78,96048000500 offers adjustable cutting height settings, allowing users to customize the length of grass cut to their preference. This feature grants lawn caretakers the flexibility to maintain their lawns according to seasonal needs or individual aesthetic choices.

Maintenance is made easy with the Poulan 532, thanks to its accessible design. Routine checks and part replacements can be conducted without significant hassle, promoting a longer lifespan for the machine. Users appreciate that they can spend less time on upkeep and more time enjoying their beautifully manicured lawns.

Overall, the Poulan 532 43 88-78,96048000500 stands out in the market for its combination of powerful performance, user-friendly features, and durable construction. Perfect for anyone who values quality lawn equipment, this accessory is sure to meet the demands of modern lawn care while providing exceptional results.
Top Page Image Contents