Poulan pb19546lt manual To Replace Mower Drive Belt See Fig, To Replace Motion Belt Drive See Fig

Page 22

SERVICE AND ADJUSTMENTS

To Replace Mower Drive Belt (See Fig. 24)

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake.

2.Lower attachment lift lever to its lowest position.

4.Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

5.Remove belt from clutch pulley (M), both mandrel pul- leys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

1.Install belt around both mandrel pulleys (R) and around idler pulleys (S) as shown.

2.Install belt onto clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

3. Raise attachment lift lever to highest position.

'

-

&

12

'

! %

"

0

#

+

,$

FIG. 24

TO REPLACE MOTION BELT DRIVE (See Fig. 25)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler (A) and clutching idler (B).

•Remove belt from centerspan idler (C).

•Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

•Remove belt downward from engine pulley (E).

•Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

•Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

•Pull belt toward front of tractor and roll belt onto engine pulley (E).

•Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

•Install belt on centerspan idler (C).

•Install belt through stationary idler (A) and clutching idler (B).

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this section of manual).

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

•Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

E

F

A

B G

C

D

22

FIG. 25

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PB19546LT General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Contents of Hardware Pack To Remove Tractor from AssemblyTools Required for Assembly CartonCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS Using the Reverse Operation SystemTo Operate Mower See Fig Before Starting the Engine Mowing Tips Maintenance General RecommendationsBlade Removal See Fig TractorTo Sharpen Blade See Fig Belts BatteryEngine Transaxle CoolingCleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G Precision SIDE-TO-SIDE Adjustment To Level MowerTo Replace Motion Belt Drive See Fig Belt InstallationTo Replace Mower Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Limited Warranty Schematic Tractor - Model Number PB19546LT 96042003500, Product no 42Electrical KEY Part Description Drive 162Repair Parts Chassis 194263 Drawbar Wheels and Tires Steering Engine Engine Power Rating Information Mower Deck Repair Parts Seat Mower Lift Service Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXPolicy

pb19546lt specifications

The Poulan PB19546LT is a powerful and versatile lawn mower designed for homeowners seeking efficiency and performance in their lawn maintenance. Equipped with a robust 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable power, making it well-suited for tackling various lawn sizes and terrains. The engine's design ensures smooth operation while minimizing vibrations, providing a more comfortable mowing experience.

One of the standout features of the PB19546LT is its 46-inch cutting deck, which allows for a wider cutting path. This size significantly reduces the time spent mowing, enabling users to cover large areas quickly. The deck is made from durable materials to withstand the rigors of outdoor use while ensuring a clean cut. Additionally, it includes a 2-in-1 cutting system, offering both mulching and bagging options, allowing users to choose the most efficient method for their lawn care needs.

Another key characteristic of the Poulan PB19546LT is its adjustable cutting height, which can be easily modified with a simple lever. This functionality provides adaptability to varying grass lengths and conditions, ensuring that users can achieve the desired lawn appearance. The mower also features a tight turning radius, making it easier to maneuver around obstacles such as trees or flower beds, enhancing overall mowing efficiency.

The PB19546LT comes equipped with a comfortable, ergonomic seat and steering wheel, allowing for extended mowing sessions without fatigue. The user-friendly instrument panel provides easy access to controls, including throttle and choke, simplifying the mowing process.

Moreover, this mower incorporates a reliable transmission system, which provides smooth acceleration and transition between speeds, an essential feature for tackling different terrains. The durable construction of the Poulan PB19546LT not only enhances its longevity but also ensures that it can withstand the challenges of regular lawn maintenance.

In summary, the Poulan PB19546LT is an excellent choice for homeowners seeking a mower that combines power, versatility, and ease of use. Its cutting-edge technologies, robust engine, and thoughtful design make it a strong contender in the lawn care market, offering a reliable solution for maintaining a beautiful lawn.
Top Page Image Contents