Poulan pb19546lt manual Check Battery See Fig

Page 7

ASSEMBLY

•Push down on seat to engage pads in slots and pull seat towards rear of tractor.

•Raise seat and tighten bolt securely.

•Remove tape and discard.

•Lower seat into operating position and sit on seat. Press clutch/brake pedal all the way down. If operating position is not comfortable, adjust seat.

To adjust seat: Grasp adjustment handle and pull up, slide seat to desired position and release adjustment handle.

SLOT

 

TAPE

PAD

 

 

FLAT

 

 

WASHER

 

 

SEAT PAN

 

BOLT

TAB

ADJUSTMENT

HANDLE

 

 

Fig. 3

CHECK BATTERY (See Fig. 4)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 4

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding the deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this man- ual). After engine has started, move throttle control to idle (slow) position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PB19546LT II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Contents of Hardware Pack Carton AssemblyTools Required for Assembly To Remove Tractor fromCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS Using the Reverse Operation SystemTo Operate Mower See Fig Before Starting the Engine Mowing Tips General Recommendations MaintenanceBlade Removal See Fig TractorTo Sharpen Blade See Fig Transaxle Cooling BatteryEngine BeltsCleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower Precision SIDE-TO-SIDE AdjustmentTo Check Brake Belt InstallationTo Replace Mower Drive Belt See Fig To Replace Motion Belt Drive See FigFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Start Engine with a Weak Battery See Fig To Adjust Steering Wheel ALIGN- MentTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when Limited Warranty Tractor - Model Number PB19546LT 96042003500, Product no 42 SchematicElectrical KEY Part Description 162 DriveRepair Parts Chassis 194263 Drawbar Wheels and Tires Steering Engine Engine Power Rating Information Mower Deck Repair Parts Seat Mower Lift Service Notes Service Notes Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationPolicy

pb19546lt specifications

The Poulan PB19546LT is a powerful and versatile lawn mower designed for homeowners seeking efficiency and performance in their lawn maintenance. Equipped with a robust 19.5 horsepower Briggs & Stratton engine, this mower delivers reliable power, making it well-suited for tackling various lawn sizes and terrains. The engine's design ensures smooth operation while minimizing vibrations, providing a more comfortable mowing experience.

One of the standout features of the PB19546LT is its 46-inch cutting deck, which allows for a wider cutting path. This size significantly reduces the time spent mowing, enabling users to cover large areas quickly. The deck is made from durable materials to withstand the rigors of outdoor use while ensuring a clean cut. Additionally, it includes a 2-in-1 cutting system, offering both mulching and bagging options, allowing users to choose the most efficient method for their lawn care needs.

Another key characteristic of the Poulan PB19546LT is its adjustable cutting height, which can be easily modified with a simple lever. This functionality provides adaptability to varying grass lengths and conditions, ensuring that users can achieve the desired lawn appearance. The mower also features a tight turning radius, making it easier to maneuver around obstacles such as trees or flower beds, enhancing overall mowing efficiency.

The PB19546LT comes equipped with a comfortable, ergonomic seat and steering wheel, allowing for extended mowing sessions without fatigue. The user-friendly instrument panel provides easy access to controls, including throttle and choke, simplifying the mowing process.

Moreover, this mower incorporates a reliable transmission system, which provides smooth acceleration and transition between speeds, an essential feature for tackling different terrains. The durable construction of the Poulan PB19546LT not only enhances its longevity but also ensures that it can withstand the challenges of regular lawn maintenance.

In summary, the Poulan PB19546LT is an excellent choice for homeowners seeking a mower that combines power, versatility, and ease of use. Its cutting-edge technologies, robust engine, and thoughtful design make it a strong contender in the lawn care market, offering a reliable solution for maintaining a beautiful lawn.
Top Page Image Contents