Nikon COOLPIXS52MB, COOLPIXS52CR user manual Connect the power cable, Charge the battery

First Steps

First Steps

Charging the Battery Using the Battery Charger (COOLPIX S52)

The camera uses a Rechargeable Li-ion Battery EN-EL8 (supplied).

Charge the battery using the Battery Charger MH-62 (supplied) before first use or when the battery is running low.

•If you are using the COOLPIX S52c, the Battery Charger MH-62 is not supplied

with the camera. Insert the battery into the camera and charge it by connecting the AC adapter. Proceed to “Inserting the Battery into the Camera” (A 14) and “Charging the Battery Using the AC Adapter (COOLPIX S52c)” (A 16).

1Connect the power cable

Connect the power cable to the battery charger 1and insert the wall plug into a power outlet 2. The CHARGE lamp will light to show that the charger is on 3.

3

2

1

2Charge the battery

Insert the battery into the battery charger. Slide the battery forward 1 and then press down until it locks into place 2.

CHARGE lamp starts blinking 3when battery is inserted. Charging is complete when lamp stops blinking 4.

About two hours are required to charge a fully exhausted battery.

12