HOW to USE Your Tractor

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

TO SET PARKING BRAKE (See Fig. 10)

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal into full “BRAKE” position and hold.

•Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

CHOKE

CONTROL ATTACHMENT CLUTCH LEVER PULL OUT TO “ENGAGE”

THROTTLE

CONTROL

			PUSH IN TO
“BRAKE”			“DISENGAGE”
POSITION		IGNITION	MOTION
		IGNITION	MOTION
		KEY	CONTROL
			LEVER
HEIGHT		PARKING BRAKE
ADJUSTMENT		PARKING BRAKE
ADJUSTMENT		“ENGAGED”
KNOB		POSITION
		POSITION
CLUTCH/BRAKE PEDAL	“DISENGAGED”
“DRIVE” POSITION	POSITION

FIG. 10

STOPPING (See Fig. 10)

MOWER BLADES -

•To stop mower blades,move attachment clutch switch to “DISENGAGED” position.

GROUND DRIVE -

•To stop ground drive, depress clutch/brake pedal into full “BRAKE” position..

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

ENGINE -

•Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to “backfire”.

•Turn ignition key to “OFF” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely, as described above, before leav- ing the operator's position; to empty grass catcher, etc.

TO USE THROTTLE CONTROL (See Fig. 10)

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower perfor- mance.

TO USE CHOKE CONTROL (See Fig. 10)

Use choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke control, pull knob out. Slowly push knob in to disengage.

TO MOVE FORWARD AND BACKWARD (See Fig. 10)

The direction and speed of movement is controlled by the motion control lever.

•Start tractor with motion control lever in neutral (N) position.

•Release parking brake and clutch/brake pedal.

•Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 10)

The cutting height is controlled by turning the height adjustment knob in desired direction.

•Turn knob clockwise ( ) to raise cutting height.

•Turn knob counterclockwise ( ) to lower cutting height.

The cutting height range is approximately 1-1/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 11)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

•Be sure tractor is on a flat level surface.

•Lower mower and adjust mower to desired cutting

13 height.

DPR22H46STA specifications

The Poulan DPR22H46STA is a robust and versatile riding lawn mower designed for homeowners seeking efficiency and reliability in lawn maintenance. With its 22 horsepower engine and a 46-inch cutting deck, this lawn mower is ideal for tackling medium to large yards, making it a favorite among garden enthusiasts.

One of the primary features of the Poulan DPR22H46STA is its powerful engine. The 22 HP Briggs & Stratton engine provides ample power for cutting through thick grass and uneven terrain. It offers a smooth starting mechanism, ensuring that the mower is ready to go at a moment’s notice. This engine is also designed for efficiency, delivering a balance between power and fuel economy, which is vital for homeowners looking to reduce operational costs.

The 46-inch cutting deck is another standout feature of this model. This size enables the mower to cover a significant area with each pass, reducing overall mowing time. The deck is made from durable materials, ensuring it can withstand the rigors of frequent use while ensuring a clean and precise cut. Additionally, the cutting height can be easily adjusted, giving users the flexibility to customize their mowing experience based on grass length and weather conditions.

A key characteristic of the Poulan DPR22H46STA is its ease of maneuverability. The mower features a tight turning radius, allowing users to navigate around obstacles like trees, flower beds, and fences with minimal effort. The comfortable seat is designed ergonomically, providing ample support for long mowing sessions, and is adjustable to suit different user preferences.

For enhanced cutting efficiency, the mower utilizes a dual-blade system that distributes grass clippings evenly. This feature minimizes the need for bagging, as the finely chopped clippings can act as a natural fertilizer when left on the lawn. In addition, the mower’s compatibility with optional mulch kits provides even more versatility for grass care.

The Poulan DPR22H46STA also emphasizes user-friendly controls, with an intuitive dashboard that makes it easy to monitor speed, fuel level, and engine performance. This ensures that lawn care is not only effective but also enjoyable.

In summary, the Poulan DPR22H46STA combines power, efficiency, and ease of use, making it a fantastic choice for homeowners looking to maintain their lawns effortlessly. With its reliable engine, spacious cutting deck, and user-friendly design, this riding mower stands out as a valuable addition to any yard maintenance arsenal.