Poulan PO12538LT Reverse Operation System ROS, To Operate Mower See Fig, To Operate on Hills

Page 12

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Depress clutch/brake pedal all the way down and hold.

With engine running, turn ignition key counterclockwise to ROS "ON" position.

Look down and behind before and while backing.

Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement.

When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER

HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

12

Image 12
Contents Model Always Wear EYE Protection During OperationSafety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Operate Mower See FigTo Operate on Hills To TransportBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Maintenance General RecommendationsTractor Blade Removal See FigTo Sharpen Blade See Fig Battery EngineBelts Transaxle CoolingCleaning Clean AIR ScreenAIR Filter MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Limited Warranty Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXParts and Service
Related manuals
Manual 28 pages 56.25 Kb

PO12538LT specifications

The Poulan PO12538LT is a remarkable lawn tractor designed for homeowners seeking efficiency and reliability in maintaining their lawns. This powerful machine combines robust construction with user-friendly features that make grass cutting a breeze.

At the heart of the Poulan PO12538LT is a robust 12 HP Briggs & Stratton engine. This engine provides ample power for tackling various terrains, whether they are flat or hilly. The engine's design emphasizes longevity and ease of starting, ensuring that users can begin their lawn maintenance tasks without hassle.

One of the standout features of the PO12538LT is its 38-inch cutting deck. This size allows for efficient maneuvering in tight spaces while still providing wide cutting coverage. The cutting deck is equipped with three adjustable blades, which can easily be set to different cutting heights. This feature is essential for achieving the desired grass length, making it ideal for users who prefer a well-manicured lawn.

The tractor utilizes a foot pedal-operated transmission that enables seamless speed adjustments. Operators can effortlessly move forward or reverse without having to disengage from the cutting deck, enhancing the overall mowing experience. This allows for greater control and precision, especially around obstacles like flower beds or trees.

Comfort is a significant focus in the design of the PO12538LT. The seat is designed to provide ample support during extended mowing sessions, reducing fatigue for the operator. Additionally, the tractor incorporates a compact, ergonomic layout that ensures easy access to controls and features, promoting a user-friendly experience.

Another innovative characteristic of the Poulan PO12538LT is its maintenance-friendly design. The easy-clean cutting deck facilitates quick cleaning after mowing, and the accessible engine compartment allows for straightforward maintenance, ensuring the tractor runs efficiently for years.

Moreover, the PO12538LT features an integrated grass catcher option, enabling homeowners to collect clippings for a tidy lawn appearance. This optional accessory can be attached and detached with ease, contributing to the convenience of the tractor.

In summary, the Poulan PO12538LT lawn tractor is an excellent choice for homeowners looking to maintain their yards efficiently. With its powerful engine, adjustable cutting deck, user-friendly controls, and comfort-focused design, it proves to be both reliable and versatile. Whether you have a small suburban yard or a slightly larger plot, the PO12538LT stands ready to tackle your lawn maintenance needs with performance and ease.