Poulan PO12538LT manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 21

SERVICE AND ADJUSTMENTS

BELT KEEPER

WIRE BELT KEEPER

 

MANDREL

PULLEY

ENGINE

PULLEY

IDLER

PULLEYS

MANDREL

PULLEY02844

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

TO REPLACE MOTION DRIVE BELT (See Fig. 20)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down between transaxle belt keepers and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

FIG. 20

FIG. 19

21

Image 21
Contents Always Wear EYE Protection During Operation ModelSafe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Contents of Hardware Pack Tools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Reverse Operation System ROSTo Operate on Hills To TransportCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigMowing Tips General Recommendations MaintenanceTractor Blade Removal See FigTo Sharpen Blade See Fig Engine BatteryBelts Transaxle CoolingClean AIR Screen CleaningAIR Filter MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Brake To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Limited Warranty Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service
Related manuals
Manual 28 pages 56.25 Kb

PO12538LT specifications

The Poulan PO12538LT is a remarkable lawn tractor designed for homeowners seeking efficiency and reliability in maintaining their lawns. This powerful machine combines robust construction with user-friendly features that make grass cutting a breeze.

At the heart of the Poulan PO12538LT is a robust 12 HP Briggs & Stratton engine. This engine provides ample power for tackling various terrains, whether they are flat or hilly. The engine's design emphasizes longevity and ease of starting, ensuring that users can begin their lawn maintenance tasks without hassle.

One of the standout features of the PO12538LT is its 38-inch cutting deck. This size allows for efficient maneuvering in tight spaces while still providing wide cutting coverage. The cutting deck is equipped with three adjustable blades, which can easily be set to different cutting heights. This feature is essential for achieving the desired grass length, making it ideal for users who prefer a well-manicured lawn.

The tractor utilizes a foot pedal-operated transmission that enables seamless speed adjustments. Operators can effortlessly move forward or reverse without having to disengage from the cutting deck, enhancing the overall mowing experience. This allows for greater control and precision, especially around obstacles like flower beds or trees.

Comfort is a significant focus in the design of the PO12538LT. The seat is designed to provide ample support during extended mowing sessions, reducing fatigue for the operator. Additionally, the tractor incorporates a compact, ergonomic layout that ensures easy access to controls and features, promoting a user-friendly experience.

Another innovative characteristic of the Poulan PO12538LT is its maintenance-friendly design. The easy-clean cutting deck facilitates quick cleaning after mowing, and the accessible engine compartment allows for straightforward maintenance, ensuring the tractor runs efficiently for years.

Moreover, the PO12538LT features an integrated grass catcher option, enabling homeowners to collect clippings for a tidy lawn appearance. This optional accessory can be attached and detached with ease, contributing to the convenience of the tractor.

In summary, the Poulan PO12538LT lawn tractor is an excellent choice for homeowners looking to maintain their yards efficiently. With its powerful engine, adjustable cutting deck, user-friendly controls, and comfort-focused design, it proves to be both reliable and versatile. Whether you have a small suburban yard or a slightly larger plot, the PO12538LT stands ready to tackle your lawn maintenance needs with performance and ease.