Poulan PO14542C Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts

Page 8

ASSEMBLY

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFORE YOU OPERATE!AND ENJOY YOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST: All assembly instructions have been completed. No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

Seat is adjusted comfortably and tightened securely.

All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed

!properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded gasoline.

Become familiar with all controls - their location and

!function. Operate them before you start the engine. Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model NO. PO14542C Safety Rules IV. ServiceGeneral Operation II. Slope OperationTable of Contents Product Specifications Customer ResponsibilitiesUnassembled Parts Steering Wheel SeatKeys Slope SheetAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine See Fig Mowing TipsADD Gasoline Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen To Service PRE-CLEANERTo Service Cartridge Engine Cooling Fins See FigCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERReplacing Battery See Figs To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO14542CElectrical KEY Part NO. NO. Description Chassis and Enclosures KEY Part Description Drive Transaxle Peerless Model 206-545C Steering Assembly Repair Parts Engine KEY Part Description Seat Assembly Decals Wheels & TiresMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck Washer, Spacer Mower Vented Service Notes Limited Warranty Policy ForSuggested Guide for Sighting Slopes for Safe Operation

PO14542C specifications

The Poulan PO14542C is a standout choice for homeowners and lawn care enthusiasts looking for a powerful and efficient riding lawn mower. This machine boasts an array of features and technologies designed to enhance performance, comfort, and ease of use, making it a reliable tool for maintaining your lawn.

At the core of the Poulan PO14542C is its robust engine. Equipped with a 14.5 horsepower Briggs & Stratton engine, this mower delivers sufficient power for mowing large areas quickly and efficiently. The engine is designed for easy starting and smooth operation, ensuring that users can tackle their lawn care tasks without hassle.

One of the key features of the PO14542C is its 42-inch cutting deck. This wide cutting swath allows users to cover more ground in less time, making lawn maintenance a quicker process. The cutting deck is adjustable, with several height settings, enabling users to achieve their desired grass length while accommodating varying lawn types and conditions.

The mower also incorporates a Hydrostatic transmission system, which provides seamless speed control and eliminates the need for shifting gears. This feature is particularly beneficial for users who want to maneuver around obstacles or adjust their speed without interruption.

Comfort is another significant consideration in the design of the PO14542C. It features a high-back seat with ample cushioning, allowing for a more comfortable ride during extended mowing sessions. The ergonomic design of the controls ensures that every function is within easy reach, providing a user-friendly experience for individuals of all sizes.

In terms of durability, the Poulan PO14542C is built to last. The frame and body are constructed from high-quality materials that can withstand the rigors of regular use. Additionally, the mower’s reinforced cutting deck ensures that it can handle tough mowing conditions without compromising performance.

For those who prioritize efficiency and versatility, this riding mower is compatible with a variety of attachments, enabling users to switch out the mowing deck for baggers, mulchers, and other implements. This versatility adds to the overall utility of the machine, making it a valuable asset in any lawn care toolkit.

Overall, the Poulan PO14542C is an exceptional riding lawn mower that caters to the needs of users seeking efficiency, comfort, and reliability in their lawn maintenance tasks. With its powerful engine, adjustable cutting deck, and advanced transmission systems, it stands out in the crowded market of lawn care equipment.
Top Page Image Contents