HOW to USE Your Tractor

The operation of any tractor can result in foreign objects thrown into the

eyes, which can result in severe eye damage. Always wear safety glasses

or eye shields while operating your tractor or performing any adjustments 00155 or repairs. We recommend a wide vision safety mask over spectacles or

standard safety glasses.

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without ﬁrst setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal all the way down and hold.

2.Pull parking brake lever up and release pressure from clutch/brake pedal. Pedal should remain in brake position. Make sure parking brake will hold tractor secure.

Attachment Clutch Lever

Throttle/Choke“Engaged” Position

Control

Ignition Key

		“Disengaged”
	Clutch/	Position
	Clutch/	Parking
	Brake	Parking
	Brake	Brake
	Pedal	Brake
	Pedal	“Engaged”
		01844
		Position

“Brake”	“Disengaged”	Gearshift
Position		Lever
	Position

STOPPING

MOWER BLADES -

•To stop mower blades, move at- tachment clutch lever to disengaged position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal all the way down.

•Move gearshift lever to neutral (N) position.

ENGINE -

•Move throttle control to slow position. NOTE: Failure to move throttle control to slow position to allow engine to idle before stopping may cause engine to “backﬁre”.

•Turn ignition key to “STOP” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead. NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor completely, as described above, before leaving the operator's position.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

TO MOVE FORWARD AND

BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

1.Start tractor with clutch/brake pedal depressed and gearshift lever in neu- tral (N) position.

2.Move gearshift lever to desired position.

3.Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete stop before shifting or changing gears. Failure to do so will shorten the useful life of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

CO1842STA specifications

The Poulan CO1842STA is a highly regarded riding lawn mower known for its robust performance and user-friendly features, making it a favorite among homeowners looking to maintain their lawns efficiently. Designed for mid-sized residential properties, this riding mower combines power, reliability, and comfort, making yard work a more manageable task.

One of the main features of the Poulan CO1842STA is its 18.5 horsepower Briggs & Stratton engine, which provides ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and consistent performance. The mower features a 42-inch cutting deck, allowing users to cover a larger area in a shorter amount of time. This size strikes a balance between maneuverability and efficiency, enabling easy navigation around trees and garden beds.

The cutting deck's height can be adjusted easily, offering six different positions to cater to various mowing preferences and grass lengths. This flexibility ensures that users can achieve the desired lawn appearance without damaging the grass. Additionally, the mower features a side discharge, which allows for efficient grass clipping dispersal.

Technologically, the Poulan CO1842STA includes a foot-operated hydrostatic transmission, which simplifies speed control. By eliminating the need for manual shifting, users can focus on steering and cutting, enhancing their overall mowing experience. The mower also features a comfortable ergonomic seat, which is crucial for long mowing sessions, reducing user fatigue.

For added convenience, the Poulan CO1842STA is equipped with a turning radius that facilitates quick and easy maneuverability in tight spaces. This feature is especially beneficial for those with intricate landscaping or numerous obstacles in their yard.

Maintenance is straightforward with this model, as it comes with a deck wash port that allows for easy cleaning of the cutting deck, promoting optimal performance and extending the life of the mower. Overall, the Poulan CO1842STA presents an impressive combination of power, comfort, and ease of use, making it a strong choice for homeowners seeking dependable lawn care equipment. Whether tackling overgrown grass or maintaining a well-manicured lawn, this riding mower stands out as a reliable partner in yard maintenance.