To Operate Mower, To Operate on Hills | Poulan CO1842STA guide

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the ﬁrst cut rela- tively high; the second to desired height.

TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a ﬂat level surface.

1.Adjust mower to desired cutting height (See “TO ADJUST MOWER CUTTING HEIGHT” in this section of manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in ap- propriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

3.Repeat for opposite side, installing gauge wheel in same adjustment hole.

Gauge

Wheel

Mounting

Bracket

3/8-16 Locknut

3/8 Washer	Shoulder
	Bolt

Gauge Wheel

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deﬂector shield in place.

Attachment Clutch Lever

“Engaged” Position

Attachemnt

Lift Lever

High Position

Low

Position

“Disengaged” Position

	Deﬂector
01931	Shield

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than ﬁve (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with speciﬁcations of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

CO1842STA specifications

The Poulan CO1842STA is a highly regarded riding lawn mower known for its robust performance and user-friendly features, making it a favorite among homeowners looking to maintain their lawns efficiently. Designed for mid-sized residential properties, this riding mower combines power, reliability, and comfort, making yard work a more manageable task.

One of the main features of the Poulan CO1842STA is its 18.5 horsepower Briggs & Stratton engine, which provides ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and consistent performance. The mower features a 42-inch cutting deck, allowing users to cover a larger area in a shorter amount of time. This size strikes a balance between maneuverability and efficiency, enabling easy navigation around trees and garden beds.

The cutting deck's height can be adjusted easily, offering six different positions to cater to various mowing preferences and grass lengths. This flexibility ensures that users can achieve the desired lawn appearance without damaging the grass. Additionally, the mower features a side discharge, which allows for efficient grass clipping dispersal.

Technologically, the Poulan CO1842STA includes a foot-operated hydrostatic transmission, which simplifies speed control. By eliminating the need for manual shifting, users can focus on steering and cutting, enhancing their overall mowing experience. The mower also features a comfortable ergonomic seat, which is crucial for long mowing sessions, reducing user fatigue.

For added convenience, the Poulan CO1842STA is equipped with a turning radius that facilitates quick and easy maneuverability in tight spaces. This feature is especially beneficial for those with intricate landscaping or numerous obstacles in their yard.

Maintenance is straightforward with this model, as it comes with a deck wash port that allows for easy cleaning of the cutting deck, promoting optimal performance and extending the life of the mower. Overall, the Poulan CO1842STA presents an impressive combination of power, comfort, and ease of use, making it a strong choice for homeowners seeking dependable lawn care equipment. Whether tackling overgrown grass or maintaining a well-manicured lawn, this riding mower stands out as a reliable partner in yard maintenance.