Poulan BB185H42YT manual Before Starting the Engine, ADD Gasoline, To Transport See Figs

Page 13

OPERATION

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/ BRAKE PEDAL IS DEPRESSED.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

TO TRANSPORT (See Figs. 4 and 8)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

Transmission Engaged

Transmission Disengaged

FIG. 8

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the

dipstick and screw cap tight, wait for a few seconds,

 

remove and read oil level. If necessary, add oil until

 

“FULL” mark on dipstick is reached. Do not overfill.

13

 

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE (See Fig. 4)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Be sure freewheel control is in the transmission engaged position.

•Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

•Place motion control lever in neutral (N) position.

•Move attachment clutch to “DISENGAGED” position.

•Move throttle control to choke position.

NOTE: Before starting, read the warm and cold starting procedures below.

•Insert key into ignition and turn key clockwise to“START” position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Always Wear EYE Protection During Operation BB185H42YTSafe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Steering Wheel Seat Unassembled PartsKey Slope SheetTools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigReverse Operation System ROS To Operate on HillsADD Gasoline Before Starting the EngineTo Transport See Figs Check Engine OIL LevelPurge Transmission Mowing TipsAutomatic Transmission Warm UP Lubrication Chart MaintenanceGeneral Recommendations Before Each USEBlade Removal See Fig TractorTo Sharpen Blade See Fig Check Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationBelt Removal Transaxle Motion Control Lever Neutral Adjustment See Fig To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigTo Adjust Steering Wheel ALIGN- Ment Transmission REMOVAL/REPLACEMENTTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points Engine dies when Limited Warranty Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

BB185H42YT specifications

The Poulan BB185H42YT is a versatile and efficient riding lawn mower designed to meet the needs of homeowners with medium to large yards. This mower combines ease of use with advanced technology, making it an ideal choice for those seeking performance and reliability in their lawn care routine.

One of the standout features of the BB185H42YT is its powerful engine. It is equipped with an 18.5 HP Briggs & Stratton engine that provides robust performance, enabling the mower to tackle tough grass and uneven terrain with ease. The engine's design ensures efficient fuel consumption, giving users peace of mind while mowing over larger areas without constantly refueling.

The mower features a 42-inch cutting deck, allowing for wider cutting paths and reducing the overall time spent mowing. The deck is constructed from durable steel, ensuring longevity and resilience against the rigors of regular use. Additionally, the BB185H42YT offers multiple cutting height adjustments, enabling homeowners to customize their lawn’s appearance according to their specific requirements.

One of the key technologies present in the Poulan BB185H42YT is the automatic transmission system. This feature allows for smooth speed adjustments while mowing, eliminating the need for manual gear shifting. As a result, users can focus on their mowing tasks without the distraction of managing speeds, ensuring a seamless mowing experience.

Maneuverability is another highlight of the BB185H42YT. With a tight turning radius, this mower can navigate around obstacles, flower beds, and trees with relative ease. This makes it an excellent option for yards with intricate layouts, saving time and effort in achieving a neat and well-manicured lawn.

Comfort is paramount in the design of the BB185H42YT. The mower comes with an adjustable high-back seat, providing ample support during extended mowing sessions. The ergonomic steering wheel design and easy-to-reach controls enhance user comfort, ensuring that mowing duties are less of a chore.

In terms of maintenance, this model is designed with user convenience in mind. The mower features easy-access components for routine checks and maintenance tasks, allowing owners to keep the machine in optimal condition without hassle.

In summary, the Poulan BB185H42YT stands out due to its powerful engine, wide cutting deck, automatic transmission, and user-friendly design. It is an excellent choice for homeowners looking for a reliable and efficient riding lawn mower capable of delivering exceptional results with minimal effort. With its combination of features and technologies, the BB185H42YT makes lawn care a manageable and enjoyable task.
Top Page Image Contents