Poulan 433471 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 19

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 12)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 12)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

 

SUSPENSION

ENGINE PULLEY

 

ARMS

 

 

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

 

(BOTH SIDES)

 

 

 

 

 

LARGE

 

 

 

HOUSING GUIDE

RETAINER

 

 

 

 

SPRING

BRACKET

 

 

 

 

 

DEFLECTOR SHIELD

 

 

 

 

FIG. 12

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model PO17542LTII. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Steering Wheel Unassembled PartsBefore Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonTo Check Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Schedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig TractorBelts BatteryTransaxle Maintenance EngineMuffler CleaningClean AIR Screen AIR FilterTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsExcessive Limited Warranty Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

433471, 96012010200 specifications

The Poulan 96012010200,433471 is a robust and reliable chainsaw designed for both professional landscapers and diligent homeowners. Known for its powerful performance, this chainsaw stands out due to its combination of advanced technology and user-friendly features, making it suitable for a variety of cutting tasks.

One of the key features of the Poulan 96012010200,433471 is its potent engine. With a highly efficient two-stroke design, it delivers ample power to tackle even the toughest jobs. This allows the chainsaw to cut through thick branches and trees with ease, ensuring quick and efficient results. Additionally, the engine's design aids in reducing emissions and noise, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The chainsaw’s ergonomic design is another significant highlight. Weighing in at a manageable level, it provides an optimal balance for ease of maneuverability during operation. The handle is designed with comfort in mind, featuring anti-vibration technology to reduce fatigue and ensure stability while cutting. This thoughtful ergonomics allows users to maintain control over long working sessions without straining their hands or arms.

Another characteristic that makes the Poulan 96012010200,433471 exceptional is its ease of use. The chainsaw comes equipped with a tool-less chain tensioning system, allowing users to adjust the chain quickly and efficiently without the need for special tools. This feature is particularly beneficial for those who might encounter unexpected situations in the field, ensuring downtime is minimized.

Safety features also prioritize the user's well-being. The chainsaw includes a chain brake that activates in the event of kickback, providing immediate stopping action. Furthermore, the throttle lock prevents accidental acceleration, which can help prevent accidents during operation.

Users will appreciate the chainsaw's durable construction, made from high-quality materials designed to withstand wear and tear over time. The Poulan 96012010200,433471 is built not just for performance, but also for longevity. With its combination of power, comfort, and safety features, this chainsaw is an excellent choice for anyone looking to invest in a reliable piece of outdoor equipment that promises to deliver exceptional results in their cutting tasks.
Top Page Image Contents