Projector
CP-X2514WN/CP-X3014WN/ CP-X4014WN/CP-WX3014WN
User's Manual (detailed)
Operating Guide – Technical
Example of computer signal
Resolution (H x V) | H. frequency (kHz) | V. frequency (Hz) | Rating | Signal mode | |
|
|
|
|
|
|
| 720 x 400 | 37.9 | 85.0 | VESA | TEXT |
| 640 x 480 | 31.5 | 59.9 | VESA | VGA (60Hz) |
| 640 x 480 | 37.9 | 72.8 | VESA | VGA (72Hz) |
| 640 x 480 | 37.5 | 75.0 | VESA | VGA (75Hz) |
| 640 x 480 | 43.3 | 85.0 | VESA | VGA (85Hz) |
| 800 x 600 | 35.2 | 56.3 | VESA | SVGA (56Hz) |
| 800 x 600 | 37.9 | 60.3 | VESA | SVGA (60Hz) |
| 800 x 600 | 48.1 | 72.2 | VESA | SVGA (72Hz) |
| 800 x 600 | 46.9 | 75.0 | VESA | SVGA (75Hz) |
| 800 x 600 | 53.7 | 85.1 | VESA | SVGA (85Hz) |
| 832 x 624 | 49.7 | 74.5 |
| Mac 16” mode |
| 1024 x 768 | 48.4 | 60.0 | VESA | XGA (60Hz) |
| 1024 x 768 | 56.5 | 70.1 | VESA | XGA (70Hz) |
| 1024 x 768 | 60.0 | 75.0 | VESA | XGA (75Hz) |
| 1024 x 768 | 68.7 | 85.0 | VESA | XGA (85Hz) |
| 1152 x 864 | 67.5 | 75.0 | VESA | 1152 x 864 (75Hz) |
| 1280 x 768 | 47.7 | 60.0 | VESA | |
| 1280 x 800 | 49.7 | 60.0 | VESA | 1280 x 800 (60Hz) |
| 1280 x 960 | 60.0 | 60.0 | VESA | 1280 x 960 (60Hz) |
| 1280 x 1024 | 64.0 | 60.0 | VESA | SXGA (60Hz) |
| 1280 x 1024 | 80.0 | 75.0 | VESA | SXGA (75Hz) |
*1 | 1280 x 1024 | 91.1 | 85.0 | VESA | SXGA (85Hz) |
*2 | 1400 x 1050 | 65.2 | 60.0 | VESA | SXGA+ (60Hz) |
| 1440 x 900 | 55.9 | 59.9 | VESA | WXGA+ (60Hz) |
*3 | 1680 x 1050 | 65.3 | 60.0 | VESA | WSXGA+ (60Hz) |
*1 | 1600 x 1200 | 75.0 | 60.0 | VESA | UXGA (60Hz) |
*1) Supported except for HDMI input.
*2) Only for
NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
•Depending on the input signal,
•Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.
•Automatic adjustment may not function correctly with some input signals.
•The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
1