Hitachi CP-X4014WN, CP-WX3014WN, CP-X3014WN, CP-X2514WN user manual Communicaion Port, Port1 Port

Command Control via the Network (continued)

Communicaion Port

The following two ports are assigned for the command control.

TCP #23

TCP #9715

Configure the following items form a web browser when command control is used.

Port Settings

		Click the [Enable] check box to open [Network
	Port open	Control Port1 (Port: 23)] to use TCP #23.
Network Control		Default setting is “Enable”.
		Click the [Enable] check box for the
Port1 (Port: 23)
	Authentication	[Authentication] setting when authentication
		is required.
		Default setting is “Disable”.
		Click the [Enable] check box to open [Network
	Port open	Control Port2 (Port: 9715)] to use TCP
		#9715.
Network Control		Default setting is “Enable”.
Port2 (Port: 9715)		Click the [Enable] check box for the
	Authentication	[Authentication] setting when authentication
		is required.
		Default setting is “Enable”.

When the authentication setting is enabled, the following settings are required.

Security Settings

	Authentication	Enter the desired authentication password.
	Password	ConfirmThis setting will be the same for
Network Control	Re-enter	[Network Control Port1 (Port: 23)] and
	Authentication	[Network Control Port2 (Port: 9715)].
	Password	Default setting is blank.

12