Hitachi CP-X4014WN, CP-WX3014WN, CP-X3014WN, CP-X2514WN user manual Inst ?

PJLink command (continued)

Commands	Control Description	Parameter or Response
		1st byte: Refers to Fan error; one of 0 to 2
		2nd byte: Refers to Lamp error; one of 0 to 2
		3rd byte: Refers to Temptrature error; one of 0 to 2
		4th byte: Refers to Cover error; one of 0 to 2
ERST ?	Error Status inquiry	5th byte: Refers to Filter error; one of 0 to 2
		6th byte: Refers to Other error; one of 0 to 2
		The mearning of 0 to 2 is as given below
		0 = Error is not detected;
		1 = Warning; 2 = Error
LAMP ?	Lamp Status inquiry	1st number (digits 1 to 5): Lamp Time
		2nd number : 0 = Lamp off, 1 = Lamp on
INST ?	Input Source List inquiry	11 12 21 22 23 31 41 51 52
NAME ?	Projector Name inquiry	Responds with the name set in "PROJECTOR
		NAME" of "NETWORK"
INF1 ?	Manufucturer's Name	HITACHI
	inquiry
		CP-X2514WN
INF2 ?	Model Name inquiry	CP-X3014WN
		CP-X4014WN
		CP-WX3014WN
INFO ?	Other Information inquiry	Responds with the factory information and so
		on
CLSS ?	Class Information inquiry	1

NOTE • The password used in PJLinkTM is the same as the password set in the Web Brouwser Comtrol. To use PJLinkTM without authentication, do not set any password in Web Browser Control.

•For specifications of PJLinkTM, see the web site of the Japan Business Machine and Information System Industries Association.

URL: http://pjlink.jbmia.or.jp/ (as of Feb. 2011)

32