Poulan 401115 manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

Page 21

SERVICE AND ADJUSTMENTS

IDLER PULLEYS

MANDREL PULLEYS

FIG. 19

TO CHECK AND ADJUST BRAKE (See Fig. 20)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than fi ve (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualifi ed service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

TO REPLACE MOTION DRIVE BELT (See Fig. 21)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by defl ecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN

KEEPER

TRANSAXLE

PULLEY

FIG. 21

FIG. 20

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Always Wear EYE Protection During Operation PB18542LTSafe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Contents of Hardware Pack Tools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Using the Reverse Operation System To Adjust Gauge Wheels See FigReverse Operation System ROS To Operate Mower See FigBefore Starting the Engine Mowing Tips Maintenance Schedule MaintenanceLubrication Chart General RecommendationsTractor Blade Removal See FigTo Sharpen Blade See Fig Engine BatteryBelts Transaxle CoolingCleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Brake To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationParts and Service

401115, 96012004600 specifications

The Poulan 96012004600,401115 is a remarkable tool designed for those who seek efficiency and power in their outdoor activities. This versatile piece of equipment is particularly well-regarded among homeowners and professionals alike who require reliable performance for yard work and landscape maintenance.

At the heart of the Poulan 96012004600,401115 is its robust engine, which delivers impressive power that allows for easy handling of various cutting tasks. Whether you're trimming grass, edging pathways, or tackling overgrown brush, this tool is equipped to handle the demands of heavy-duty yard work. The manufacturer has integrated advanced engine technologies, ensuring a balance between performance and fuel efficiency, which helps users save on running costs over time.

One of the main features of the Poulan 96012004600,401115 is its lightweight design. Weighing in at a manageable level, it allows users to maneuver the tool with ease, reducing fatigue during extended periods of use. It's an excellent choice for both casual users and professionals who require a tool that can be used for long hours without discomfort.

The ergonomic handle design is another highlight, providing users with a comfortable grip that enhances control. This feature minimizes strain on the hands and wrists, making it easier to operate the tool for prolonged durations. Additionally, the adjustable cutting height feature allows for customization according to the specific needs of the lawn or garden, making it suitable for varied terrains.

Safety is paramount in outdoor equipment, and the Poulan 96012004600,401115 does not disappoint. It comes with safety guards and easy-start mechanisms, including an automatic oiler to keep the chain properly lubricated, ensuring smooth operation and extending the tool's lifespan.

In terms of versatility, this tool can accommodate different attachments, allowing users to switch from trimming to edging to even more complex landscaping tasks with minimal effort.

Overall, the Poulan 96012004600,401115 stands out for its powerful performance, ease of use, and thoughtful features that cater to a wide range of outdoor tasks. With its combination of innovative technologies and user-friendly design, this tool is an outstanding choice for anyone looking to maintain their landscape with efficiency and precision.
Top Page Image Contents