Poulan 424368 manual Maintenance, Lubrication Chart, Powdered Graphite Type Lubricant Sparingly

Page 13
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and ROS systems for proper operation.
• Check for loose fasteners.
At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.
Clean Air Filter
Clean Air Screen
Inspect Muffler/Spark Arrester
Replace Oil Filter (If equipped)
Clean Engine Cooling Fins
E
N
G
I
N
E
Change Engine Oil (without oil filter)
Check Operator Presence & ROS Systems
T
R
A Check for Loose Fasteners C Check/Replace Mower Blades T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level
Change Engine Oil (with oil filter)
Check Tire Pressure
Check Brake Operation
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual.
EACH
USE
MAINTENANCE
SCHEDULE
BEFORE

MAINTENANCE

EVERY

EVERY

EVERY

EVERY

EVERY

BEFORE

8

25

50

100

SEASON

STORAGE

HOURS

HOURS

HOURS

HOURS

 

 

3

4

1,2

1,2

2

2

1, 2

2

2

3 - Replace blades more often when mowing in sandy soil. 4 - Not required if equipped with maintenance-free battery.

maint_sch-tractore.ROS.e

LUBRICATION CHART

SPINDLE ZERK

SPINDLE ZERK

 

WHEELFRONT

FRONT

BEARING

ZERK

WHEEL

 

BEARING

ENGINE

ZERK

GEARSHIFT

PIVOTS

01961

SAE 30 or 10w30 motor oil

General Purpose Grease

Refer to Maintenance “ENGINE” Section

IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY,

13POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY.

Image 13
Contents PXT15538 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Tools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Tire Pressure Install Seat See FigCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills Before Starting the EngineTowing Carts and Other Attachments To TransportADD Gasoline Mowing TipsTo Start Engine See Fig Lubrication Chart MaintenancePowdered Graphite Type Lubricant Sparingly Tractor BatteryBlade Care Blade Removal See FigEngine CleaningTo Install Mower See Fig Service and AdjustmentsTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake Belt RemovalFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Adjust Carburetor To Adjust Throttle Control CableTo Replace Headlight Bulb Interlocks and RelaysOther StorageFuel System Engine OILProblem Cause Correction TroubleshootingBattery will not To run when operWhen turning ExcessiveFold Along This Dotted Line Degree Slope Only Ride UP and Down Hill Not Across Hill Degrees MAXHOP Outdoor Products Customer Service DeptCanada contact Stevens Creek Road Terry Fox Way Augusta, GA 30907 USAAutorisé Dept Service Customer Products Outdoor Canada AuGarantie cette de exclus sont normal l’entretien et Degrés MAX Correction Cause Problème Dépannage DE GuidePuissance de Entreposage Carburateur LE Régler Pour Réglages ET RévisionFig la Voir Calandre LA ET Capot LE Enlever Pour Vitesses DE Boîte LA DE Mentgechan Fig la VoirDE Levier DU Neutre AU Réglage Fig la Voir Tionsraparé LES Pour Roues LES Enlever PourFig la Voir Tondeuse DE Lame DE Courroie LA Remplacer Pour Freins LES Vérifier PourDE Boîtier LE Niveau DE Mettre Pour Tondeuse LA Installer PourSedeuton FiglaVoirTONDEUSELAENLEVERPOURMoteur EntretienTrapézoïdales Courroies Fig la Voir Lame LA EnleverLames DES Entretien PneusLubrification DE Tableau Utilisation Chaque AvantMoteur de d’huile niveau le Vérifiez Tonte DE Conseils UtilisationFig la Voir Moteur LE Démarrer Pour ’ESSENCE Réservoir LE RemplirMoteur DU D’HUILE Niveau LE Vérifier Accessoires AutresTracteur LE Transporter Pour Arrière Marche EN FonctionnementT O S I L I T U GAZ DES Commande LA Utiliser Pour02829 Du et/ou tracteur du endommagement un en MoteurModérées Ou mineures blessures des causer pourraitFrein DE Système LE Vérifier MontagePlace EN Correctement Sont Courroies LES Toutes SI VérifierFig la Voir Batterie LA Vérifier DE Tracteur LE Retirer AvantTionrecdi DE Volant LE Fixer Carton LE DeballerSiège Montar SIN PiezasSommaire Entretien EnfantsRemorquage Général EntretienPentes LES Dans Fonctionnement AvertissementTracteurs des sécurité toute en l’utilisation pour Conseils Général FonctionnementPelouse DE Tracteur PXT15538

424368 specifications

The Poulan 424368 is a versatile and powerful chainsaw designed for both professionals and home users alike. Known for its reliable performance and rugged construction, this chainsaw is perfect for a variety of cutting tasks, from felling trees to pruning limbs and even light milling jobs. With several advanced features and technologies, the Poulan 424368 stands out in a competitive market.

One of the main features of the Poulan 424368 is its robust engine. It is equipped with a potent 42cc two-cycle engine that delivers impressive power, enabling users to cut through tough wood with ease. This engine is designed for optimal efficiency, ensuring that you can accomplish more with less fuel consumption. With a power output of approximately 2.8 horsepower, users can expect quick starts and consistent performance, making this chainsaw ideal for both light and heavy-duty tasks.

The chainsaw showcases a 16-inch bar, providing a perfect balance between maneuverability and cutting capacity. The length of the bar is suitable for tackling medium-sized trees and branches without compromising on the saw's agility. Additionally, the chain is designed to be low-kickback, enhancing user safety while significantly improving cutting precision.

Equipped with professional-grade features, the Poulan 424368 incorporates an easy-access air filter and a tool-free chain tensioning system. These elements contribute to simple maintenance and adjustments, allowing users to spend less time on upkeep and more time working. The primer bulb enables easy starting, reducing the frustration often associated with chainsaws.

Another notable characteristic is the ergonomic design of the Poulan 424368. It features a lightweight build with a balanced weight distribution, allowing users to operate it comfortably for extended periods. The rubberized handles provide a secure grip, ensuring that users maintain control during cutting tasks.

Safety is also a primary consideration in the design of the Poulan 424368. It includes an inertia-activated chain brake that enhances protection against accidental cuts while in operation. This feature, combined with its low vibration technology, reduces user fatigue, making it an ideal choice for extensive cutting projects.

In summary, the Poulan 424368 is a feature-rich chainsaw combining power, efficiency, and safety. With its high-performing engine, user-friendly design, and reliable safety features, it satisfies the needs of both casual users and seasoned professionals alike. Whether you are clearing debris after a storm or maintaining your landscape, the Poulan 424368 is a dependable tool that delivers exceptional results with every cut.