MULCHER PLUG TYPE “B”
To convert to bagging or discharging:
• Lift discharge guard and remove mulcher plug.
• Mower can now be used for side dis- charging or optional grass catcher can be attached.
•To return to mulching operation, simply reinstall mulcher plug as shown, making sure tab is seated properly.
CAUTION: Do not run your lawn mower | Slots | |
without discharge guard, approved grass | ||
| ||
catcher or mulcher plug in place. |
|
Lift discharge guard
| Mulcher |
SIDE DISCHARGING | plate tabs |
•Mulcher plate must be installed into rear discharge opening of mower (see above instructions).
•Open mulcher door and install discharge deflector under door as shown.
•Mower is now ready for discharging operation.
•To convert to mulching or bagging operation, discharge deflector must be removed and mulcher door must be closed.
Install | Tab |
mulcher plug |
|
MOWER IS
Open mulcher door
Discharge deflector
NOW READY
FOR MULCHING
OPERATION
“COMBI-CUT” MOWERS
Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:
REAR BAGGING
• Open rear door and remove mulcher plate. Store mulcher plate in a safe place.
•You can now install grass catcher.
•To convert to mulching or discharging operation, install mulcher plug into rear discharge opening of mower, making sure all tabs are seated properly.
10