“AUTO WALK” or
•Remove drive cover and belt keeper.
•Remove belt from gearcase pulley by pushing down on pulley and rolling belt off it.
•Turn lawn mower on its side. See engine manual for proper direction of turning over the engine.
•Remove blade and debris shield.
•Remove belt from engine pulley on crankshaft.
•Install new belt by reversing above steps.
NOTE: Always use factory approved belt to assure fit and long life.
MODELS WITH GEARCASE-MOUNTED BELT KEEPER AND DEBRIS SHIELD:
•Remove drive cover and belt keeper.
•Remove belt from gearcase pulley.
•Turn lawn mower on its side. See engine manual for proper direction of turning over the engine.
•Remove blade, engine pulley and debris shield.
•Remove belt and engine pulley from debris shield.
•Install new belt by reversing above steps.
NOTE: Always use factory approved belt to assure fit and long life.
Drive
cover Belt
Belt keeper
PUSH DOWN
OR:
Belt keeper
Belt
Belt
Drive cover
PUSH
DOWN
Belt retainer
Debris shield
Drive cover
Gearcase pulley
Belt keeper
Engine pulley
Drive belt
21