Poulan 193747 manual Operation, HOW to USE Your Lawn Mower, To Adjust Cutting Height

Page 15

OPERATION

The operation of any lawn

mower can result in foreign objects thrown into the

eyes, which can result in severe eye damage. Always

wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recom- mend standard safety glasses or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED CONTROL MODELS WITH REMOTE THROTTLE Engine speed is controlled by the throttle control located on the upper handle.

•Move lever forward to FAST engine speed for starting and better bagging.

•Move lever backward for SLOW speed.

•Some models have engines equipped with a choke feature. Move the lever all the way forward to the CHOKE position when starting a cold engine.

TO ADJUST CUTTING HEIGHT

Adjust cutting height to suit your require- ments. Medium position is best for most lawns. Raise wheels for low cut and lower wheels for high cut.

MODELS WITH MANUAL ADJUST BOLT-ON WHEELS

•Remove wheel, bolt, and hardware and reassemble in desired adjustment hole.

•Reinstall wheel components in the same order as they were before removal. Tighten securely.

•Make sure all wheels are at the same height.

Flat washer

Wheel

Bolt

3/8-16 Spacer Locknut

CHOKE

 

SLOW

MODELS WITH "QUICK ADJUST"

FAST

WHEEL HEIGHT ADJUSTERS

(START)

 

 

 

 

NOTE: For shipping purposes, the rear wheels on your lawn mower may not be adjusted to the same position as the front wheels. Before operating mower, adjust all wheels to the same cutting height.

 

•

Raise wheels for low cut and lower

 

 

wheels for high cut.

Remote

• Adjust cutting height to suit your require-

 

ments. Medium position is best for most

throttle

 

control

 

lawns.

• To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9- position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

MODELS WITH FIXED SPEED ENGINES Engine speed was set at the factory for optimum performance. Engine speed is not adjustable.

LEVER BACKWARD

Plate tab

TO LOWER MOWER

 

15 LEVER FORWARD TO RAISE MOWER Lever

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Economy Push Rotary Safety Rules Table of ContentsDo not General Service III. ChildrenII. Slope Operation IV. Safe Handling of GasolineEngines To Remove Mower from CartonBriggs & Stratton Engines Tecumseh HondaParts Packed Separately in Carton Parts BAG Contents Group C Group E USE Hardware Group a AssemblyAssemble Lower Handle Assemble Upper HandleAssemble Wheels Assemble Upstop BracketInstall Control BAR Install Discharge GuardModels with Briggs & Stratton Quantum Engines USE Hardware Group EAssemble Engine Zone Control Cable to Engine Briggs & Stratton Classic and Sprint EnginesAssemble Engine Zone Control Cable to Engine Models with Briggs & Stratton Classic or Sprint EngineModels with Tecumseh Engine Assemble Grass Catcher SparkplugbootifequippedAssemble Cables to Upper Handle Assemble Rope GuideOperation HOW to USE Your Lawn MowerTo Adjust Cutting Height Models with Manual Adjust BOLT-ON WheelsFill Engine with OIL Operator Presence Engine Control BARGrass Catcher Rear Discharge Models only Before Starting EngineMowing Tips To Start EngineBefore Each USE MaintenanceLubrication Chart General RecommendationsLawn Mower TiresBlade Care Engine Service and AdjustmentsStorage Lawn Mower EngineOther Does not start Problem Cause CorrectionStarter rope

193747 specifications

The Poulan 193747 is a powerful and efficient chainsaw that is designed for both professional and residential use. Known for its durability and high performance, this chainsaw is a popular choice among homeowners and landscapers alike.

One of the main features of the Poulan 193747 is its robust engine, which delivers reliable power for various cutting tasks. The chainsaw is equipped with a high-performance 50cc two-stroke engine, providing an ideal balance between power and weight. This ensures that users can handle the chainsaw for extended periods without undue fatigue.

Another standout characteristic of the Poulan 193747 is its lightweight design. Weighing in at just around 10 pounds, this chainsaw is easy to maneuver, making it suitable for overhead cuts and reaching into tight spaces. The ergonomic handle provides a comfortable grip, reducing vibrations and enhancing control during operation.

The chainsaw features a 20-inch bar and chain, allowing for effective cutting of larger trees and limbs. With a chain speed of up to 15 meters per second, it enhances cutting efficiency, making tasks quicker and reducing overall fatigue. Additionally, the tool-less chain tensioning system allows users to adjust and maintain chain tension easily without the need for additional tools.

In terms of technology, the Poulan 193747 incorporates advanced air induction technology. This system helps to keep debris out of the air filter, resulting in improved engine performance and prolonged filter life. The easy-start system minimizes the effort required to start the chainsaw, ensuring a hassle-free experience even for those who are less experienced.

Safety is also a top priority in the design of the Poulan 193747. The chainsaw is equipped with a handguard and a chain brake that automatically engages during kickback situations. These features help protect the user from accidents and injuries, making it a reliable choice for both novice and experienced operators.

Overall, the Poulan 193747 combines power, portability, and safety features in a versatile chainsaw that can handle various cutting tasks. Whether you're pruning trees, cutting firewood, or clearing debris, the Poulan 193747 proves to be an excellent tool, blending performance with user-friendly design for effective outdoor work.
Top Page Image Contents