Poulan 193747 manual Service and Adjustments, Engine

Page 20

TO CHANGE ENGINE OIL (SEE ENGINE MANUAL)

•Be sure mower is on a level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•For engines without dipstick, remove bottom oil drain plug.

•For engines with oil fill cap/dipstick, remove bottom drain plug or remove en- gine oil cap and turn mower on its side.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Refill engine with oil. Pour slowly. Do not overfill.

•Fill to top of slot inside of filler hole or to “FULL” line on dipstick on models so equipped. Keep oil at proper level.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Clean the element after every 25 hours of operation, more often if lawn mower is used in very dusty, dirty conditions.

See the maintenance section of your engine manual.

SPARK PLUG

Change the spark plug once a year to make the engine run better and easier to start. Set spark plug gap according to engine manual specifications.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

CLEANING

IMPORTANT: For best performance, keep mower housing free of grass build-up and trash. Clean the underside of your mower after each use.

•Clean the underside of your lawn mower by scraping to remove buildup of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

We do not recommend using a garden hose to clean your lawn mower unless the electrical system, muffler, air filter, and carburetor are covered to keep water out. Water in engine can shorten engine life.

SERVICE AND ADJUSTMENTS

CAUTION: Before performing any service or adjustments-

•Release operator presence control bar.

•Make sure the blade and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

LAWN MOWER

REAR DEFLECTOR (IF EQUIPPED)

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

ENGINE

CARBURETOR

The carburetor has been preset at the fac- tory and adjustment should not be neces- sary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load.

•The air filter must be assembled to the carburetor when running engine.

•Best carburetor adjustment is obtained when fuel tank is 1/4 full.

•In order for the engine to run, the operator presence control bar must be held in the operating position. Therefore, and assis- tant will be required to hold the control bar

in the operating position when making final adjustment to the carburetor.

See the ADJUSTMENT section of your engine manual for further instructions.

ENGINE SPEED

The engine speed has been factory set. Do not attempt to increase engine speed as it may result in personal injury. If you believe the engine is running too fast or too slow, take your lawn mower to an authorized engine service center for repair and adjustment.

THROTTLE CONTROL

If it becomes necessary to adjust or re- place the throttle control, see the ADJUST- MENT section of your engine manual.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Economy Push Rotary Table of Contents Safety RulesGeneral Service III. Children II. Slope OperationIV. Safe Handling of Gasoline Do notTo Remove Mower from Carton Briggs & Stratton EnginesTecumseh Honda EnginesParts Packed Separately in Carton Parts BAG Contents Group C Group E Assembly Assemble Lower HandleAssemble Upper Handle USE Hardware Group aAssemble Upstop Bracket Assemble WheelsInstall Discharge Guard Install Control BARUSE Hardware Group E Assemble Engine Zone Control Cable to EngineBriggs & Stratton Classic and Sprint Engines Models with Briggs & Stratton Quantum EnginesModels with Tecumseh Engine Assemble Engine Zone Control Cable to EngineModels with Briggs & Stratton Classic or Sprint Engine Sparkplugbootifequipped Assemble Cables to Upper HandleAssemble Rope Guide Assemble Grass CatcherHOW to USE Your Lawn Mower To Adjust Cutting HeightModels with Manual Adjust BOLT-ON Wheels OperationOperator Presence Engine Control BAR Grass Catcher Rear Discharge Models onlyBefore Starting Engine Fill Engine with OILTo Start Engine Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USEBlade Care Lawn MowerTires Service and Adjustments EngineOther StorageLawn Mower Engine Problem Cause Correction Does not startStarter rope

193747 specifications

The Poulan 193747 is a powerful and efficient chainsaw that is designed for both professional and residential use. Known for its durability and high performance, this chainsaw is a popular choice among homeowners and landscapers alike.

One of the main features of the Poulan 193747 is its robust engine, which delivers reliable power for various cutting tasks. The chainsaw is equipped with a high-performance 50cc two-stroke engine, providing an ideal balance between power and weight. This ensures that users can handle the chainsaw for extended periods without undue fatigue.

Another standout characteristic of the Poulan 193747 is its lightweight design. Weighing in at just around 10 pounds, this chainsaw is easy to maneuver, making it suitable for overhead cuts and reaching into tight spaces. The ergonomic handle provides a comfortable grip, reducing vibrations and enhancing control during operation.

The chainsaw features a 20-inch bar and chain, allowing for effective cutting of larger trees and limbs. With a chain speed of up to 15 meters per second, it enhances cutting efficiency, making tasks quicker and reducing overall fatigue. Additionally, the tool-less chain tensioning system allows users to adjust and maintain chain tension easily without the need for additional tools.

In terms of technology, the Poulan 193747 incorporates advanced air induction technology. This system helps to keep debris out of the air filter, resulting in improved engine performance and prolonged filter life. The easy-start system minimizes the effort required to start the chainsaw, ensuring a hassle-free experience even for those who are less experienced.

Safety is also a top priority in the design of the Poulan 193747. The chainsaw is equipped with a handguard and a chain brake that automatically engages during kickback situations. These features help protect the user from accidents and injuries, making it a reliable choice for both novice and experienced operators.

Overall, the Poulan 193747 combines power, portability, and safety features in a versatile chainsaw that can handle various cutting tasks. Whether you're pruning trees, cutting firewood, or clearing debris, the Poulan 193747 proves to be an excellent tool, blending performance with user-friendly design for effective outdoor work.
Top Page Image Contents