HHB comm CDR 830 manuel dutilisation Monitoring a source, To establish the copy-bit Scms setting

Page 36

More recording

 

 

2,3

SCROLL

DISPLAY

MONITOR

ERASE

FINALIZE

 

CD TEXT

Monitoring a source

When recording, or in record- pause mode, the source signal is always available for monitoring through a connected audio system or through a pair of headphones plugged into the CDR–830’s phones jack. Even if you’re not recording, you can still monitor—useful for cueing up for the next recording and also for checking that tracks are starting in the proper places during automatic track numbering.

1 Start the source component playing.

Make sure that the input selector is set to the correct input.

2 Press MONITOR.

The indicator above the MONITOR button lights up.

•When automatic track numbering has been selected, the TRACK indicator will light for 2 seconds at track start points. See Automatically numbering tracks on page 33 if you find the recorder can’t recognize the gaps between tracks.

•When monitoring through a digital output, you cannot hear changes you make in the recording level or balance.

3 To switch off monitoring, press MONITOR again.

The monitor indicator switches off.

2,3,4

DIGITAL

ANALOG

REC LEVEL

REC LEVEL

TEXT

SYNCHRO

PROFESSIONAL

1

AUTO/

¥￿ REC SYNCHRO MANUAL

 

DISPLAY

 

A B C

D E F

 

 

 

1

2

3

 

 

TITLE

G H I

J K L

M N O

 

 

/MODE

 

 

 

4

5

6

 

 

SCROLL P Q R S

T U V

W X Y Z

 

1

 

7

8

9

 

MENU/

MARK

 

TEXT

 

DELETE

 

 

 

 

10/0

>10

 

2,3

 

4

CURSOR

¢￿

3

1 ENTER Á￿

7 2,4

REPEAT RANDOM NAMECLIP

8

FADER PROGRAM CHECK CLEAR

SKIP PLAY SKIP ID INPUT

SELECTER

SET CLEAR

COMPACT DISC RECORDER

REMOTE CONTROL UNIT

To establish the copy-bit (SCMS) setting

These settings control the number of generations of digital copies that can be made from the recorded disc. Use this function to set whether the disc can be copied unlimited times, once, or not at all. The status of the copy- bit in the incoming digital signal is ignored and the copy-bit setting on the recorded disc is only set by this menu function.

1Press MENU/DELETE.

2Turn the jog dial until COPY : PERMIT appears in the display, then press to

ENTER.

3Use the jog dial (4 and ¢ on the remote) to

select the copy flag setting.

The default setting is copy permit. Turn the dial to cycle through the following settings:

COPY : PERMIT

ÐPermits unlimited copies

COPY : ONCE

ÐPermits one copy only

COPY : INHIBT

ÐRestricts all copying

•When the original setting is changed, a question mark (?) blinks next to the selected option.

4 Press the jog dial (ENTER) to confirm the setting.

The question mark disappears from the display and the new setting is confirmed.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions Important Safety Instructions For U.S. model Class Laser Product Contents Features of the CDR-830 BurnIT CD recorder Using this manualHints on installation Putting the batteries in the remote control Care and maintenanceAbout CD, CD-R and CD-RW discs Recording and finalizing discs Recording copyright materialConnecting up for digital playback & recording Using the digital inputsUsing the digital outputs About optical and coaxial jacksConnecting up for analog playback & recording POWER-CORD CautionFront panel Remote Display Switching on for the first time Using the menu FeaturesSelecting tracks DirectlyShowing disc information Introduction to CD recordingDigital recording restrictions Digital signal interruptions Power interruptionsRecording modes Miscellaneous informationRecording one track from a source SynchroRecording all tracks from a source Press 7 to finish recordingAutomatically recording and finalizing a disc Press Record REC on the remote control Start playing the source to check the signalWhen youre done, press Manual recordingSetting the digital recording level Make sure one of the digital inputs is selectedSetting the analog recording level Press Input Selector to choose the analog inputSetting the balance Adjust the balance using the REC Balance buttonsEnter Press the jog dial Enter to confirm the balanceResetting the recorder Finalizing a discLoad the CD-R or CD-RW you want to finalize Press FinalizeProgramming the track order Clearing the playlistClearing a track from the playlist Checking whats in the playlistPlaying tracks at random Repeating tracksFading in and fading out Playing a disc with skip IDsSetting skip IDs SkippingUnwanted tracks Clearing skip IDsUsing CD text Press TextEditing CD text Load the CD-R or CD-RW you wish to edit Press TextEdit the text Eject or finalize the discPress Text to leave the track name mode Copying track names to other tracksGo to the track with the name you want to copy Press Name Clip againAutomatically numbering tracks Manually numbering tracksDelete Setting the fade length Starting tracks in time incrementsRecording fade ins and fade outs Recording a fadeRecording blank sections Checking whats at the end of a disc¥ REC Mute To establish the copy-bit Scms setting Monitoring a sourceWhen a non-finalized disc is loaded Erasing a CD- RW discPress Erase Press 8 6 on the front panel to start erasingWhen a finalized disc is loaded Reinitializing a discPress and hold Erase for about four seconds Understanding display messages Troubleshooting Display messages relating to playbackDisplay messages relating to recording Power cannot be Turned onNo sound is heard During playbackSpecifications GeneralTNGZF/00J00001 Printed PRB1312-A Quick Reference Guide BurnIT CDR830 Compact Disc Recorder Operating Instructions Supplement Supplement Technical Data
Top Page Image Contents