HHB comm CDR 830 Erasing a CD- RW disc, When a non-finalized disc is loaded, Press Erase

Page 37

1

SCROLL DISPLAY TITLE/MODE MONITOR

		TRACK NO.
		WRITE
ERASE	FINALIZE	AUTO	INPUT
ERASE	FINALIZE	MANUAL	SELECTOR

CD TEXT

2

DIGITAL	ANALOG
REC LEVEL	REC LEVEL

TEXT

SYNCHRO

PROFESSIONAL

3

Erasing a CD- RW disc

Although more expensive than CD-R discs, the great advantage of CD-RW is that the discs can be erased and reused. Various erase options are available depending

on whether the disc has been finalized.

A third, special option, erases (re- initializes) the whole disc. This process takes quite a long time to complete and should be used for recovering damaged discs, not for erasing tracks from a healthy disc.

Caution!

Never switch off the power during CD-RW erasing - your disc may become unusable.

If the message CHECK DISC appears any time during any erase process, press 0, take out the disc, clean it, then try the erase command again.

Be sure to remove the disc from the recorder before switching off the power, otherwise the erase operation will not be completed.

6 More recording features

When a non-finalized disc is loaded

1 Press ERASE.

The display shows ERASE LAST?.

•Press 7 to cancel last track erase here.

2Use the jog dial or press 4 and ¢ on the remote control to change the erase

option.

Switch between:

ERASE LAST? – erase just the last track

ERASE ALL? – erase all tracks

ERASE 02–[LAST TRACK]? – erase track 2 and all subsequent tracks

ERASE 03–[LAST TRACK]? – erase track 3 and all subsequent tracks

Keep turning the jog dial or press

4and ¢ on the remote control to change the number of tracks to erase.

3 Press 8 (6 on the front panel) to start erasing.

The process takes just a few seconds. During this time, the function indicator lights.

37

Image 37

Contents Operating Instructions Important Safety Instructions For U.S. model Class Laser Product Contents Using this manual Features of the CDR-830 BurnIT CD recorderHints on installation Care and maintenance Putting the batteries in the remote controlAbout CD, CD-R and CD-RW discs Recording copyright material Recording and finalizing discsUsing the digital inputs Connecting up for digital playback & recordingUsing the digital outputs About optical and coaxial jacksPOWER-CORD Caution Connecting up for analog playback & recordingFront panel Remote Display Switching on for the first time Features Using the menuSelecting tracks DirectlyIntroduction to CD recording Showing disc informationDigital recording restrictions Power interruptions Digital signal interruptionsRecording modes Miscellaneous informationSynchro Recording one track from a sourcePress 7 to finish recording Recording all tracks from a sourceAutomatically recording and finalizing a disc Start playing the source to check the signal Press Record REC on the remote controlWhen youre done, press Manual recordingMake sure one of the digital inputs is selected Setting the digital recording levelPress Input Selector to choose the analog input Setting the analog recording levelAdjust the balance using the REC Balance buttons Setting the balanceEnter Press the jog dial Enter to confirm the balanceFinalizing a disc Resetting the recorderLoad the CD-R or CD-RW you want to finalize Press FinalizeClearing the playlist Programming the track orderClearing a track from the playlist Checking whats in the playlistRepeating tracks Playing tracks at randomFading in and fading out Playing a disc with skip IDsSkipping Setting skip IDsUnwanted tracks Clearing skip IDsPress Text Using CD textLoad the CD-R or CD-RW you wish to edit Press Text Editing CD textEdit the text Eject or finalize the discCopying track names to other tracks Press Text to leave the track name modeGo to the track with the name you want to copy Press Name Clip againManually numbering tracks Automatically numbering tracksDelete Starting tracks in time increments Setting the fade lengthRecording fade ins and fade outs Recording a fadeChecking whats at the end of a disc Recording blank sections¥ REC Mute Monitoring a source To establish the copy-bit Scms settingErasing a CD- RW disc When a non-finalized disc is loadedPress Erase Press 8 6 on the front panel to start erasingReinitializing a disc When a finalized disc is loadedPress and hold Erase for about four seconds Understanding display messages Display messages relating to playback TroubleshootingDisplay messages relating to recording Turned on Power cannot beNo sound is heard During playbackGeneral SpecificationsTNGZF/00J00001 Printed PRB1312-A Quick Reference Guide BurnIT CDR830 Compact Disc Recorder Operating Instructions Supplement Supplement Technical Data