Poulan 192087 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 13)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 13)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

SUSPENSION

ENGINE PULLEY

ARMS

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

(BOTH SIDES)

 

 

 

 

LARGE

 

 

HOUSING GUIDE

RETAINER

 

 

 

SPRING

 

 

 

BRACKET

 

DEFLECTOR SHIELD

 

 

 

FIG. 13

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model NO. PO17542STD Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingMuffler CleaningAIR Filter Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Attach Jumper Cables To Start Engine with a Weak Battery See FigTo Remove Wheel for Repairs See Fig To Remove CABLES, Reverse OrderTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

192087 specifications

The Poulan 192087 is a powerful chainsaw designed for both professional and home use, showcasing a blend of reliability, performance, and user-friendly features. It is particularly well-suited for various cutting tasks, from felling trees to trimming branches and cutting firewood, making it a versatile tool in any outdoor toolkit.

One of the standout features of the Poulan 192087 is its robust engine. With a potent gas-powered engine, this chainsaw provides the necessary power and torque for tackling even the toughest jobs. The engine is designed for efficiency, delivering excellent cutting performance while maintaining lower fuel consumption. This makes it ideal for users who need to work on larger projects without the frequent need for refueling.

Another significant characteristic of the Poulan 192087 is its lightweight and ergonomic design. Weighing in at just over 10 pounds, this chainsaw is easy to handle, which reduces user fatigue during extended use. The comfort-grip handle allows for a secure hold, enhancing overall control and maneuverability. This is particularly beneficial for users who might be working in awkward positions or for long periods.

The Poulan 192087 is also equipped with a 18-inch bar and chain, which strikes a balance between cutting capacity and ease of use. This size is perfect for medium to large cutting tasks, providing sufficient reach without being unwieldy. The chain itself features low kickback technology, making it safer for novice users while still delivering high performance.

Maintenance is made simpler with the tool-less chain tensioning system, allowing users to adjust chain tightness easily and efficiently without needing additional tools. This feature, combined with an automatic oiling system, ensures that the chain remains in optimal condition, enhancing its lifespan and cutting efficiency.

Lastly, the Poulan 192087 showcases a durable build suitable for outdoor conditions. Its sturdy construction ensures reliability, even when exposed to the elements. These features combined make the Poulan 192087 a dependable choice for anyone in need of a powerful, effective, and user-friendly chainsaw, whether for professional landscaping or casual home use. With its blend of performance, comfort, and practicality, this chainsaw is a valuable addition to any toolkit.
Top Page Image Contents