Poulan 192087 manual Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

7/16" wrenches

Utility knife

(2)

3/4" wrench

Tire pressure gauge

Pliers

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

Remove all accessible loose parts and parts cartons from carton.

Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

Slide extension shaft onto lower steering shaft. Align mounting holes in extension and lower shafts and install 1/4 hex bolt and locknut. Tighten securely.

IMPORTANT: TIGHTEN BOLT AND NUT SECURELY TO 10-12 FT. LBS TORQUE.

Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

Position front wheels of the tractor so they are pointing straight forward.

Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

Assemble large flat washer, 1/2 hex nut and tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKIDTHAT MAY PUNCTURETIRESWHERETRACTOR IS TO ROLL OFF SKID.

 

INSERT

 

1/2 HEX NUT

 

LARGE FLAT

 

WASHER

STEERING

 

WHEEL

STEERING

 

 

BOOT

 

TABS

ADAPTER

 

 

EXTENSION SHAFT

 

1/4 HEX BOLT

1/4 LOCKNUT

 

LOWER

 

STEERING

 

SHAFT

 

 

TAB

 

SLOTS

FIG. 1

6

Image 6
Contents Model NO. PO17542STD Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingMuffler CleaningAIR Filter Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Attach Jumper Cables To Start Engine with a Weak Battery See FigTo Remove Wheel for Repairs See Fig To Remove CABLES, Reverse OrderTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

192087 specifications

The Poulan 192087 is a powerful chainsaw designed for both professional and home use, showcasing a blend of reliability, performance, and user-friendly features. It is particularly well-suited for various cutting tasks, from felling trees to trimming branches and cutting firewood, making it a versatile tool in any outdoor toolkit.

One of the standout features of the Poulan 192087 is its robust engine. With a potent gas-powered engine, this chainsaw provides the necessary power and torque for tackling even the toughest jobs. The engine is designed for efficiency, delivering excellent cutting performance while maintaining lower fuel consumption. This makes it ideal for users who need to work on larger projects without the frequent need for refueling.

Another significant characteristic of the Poulan 192087 is its lightweight and ergonomic design. Weighing in at just over 10 pounds, this chainsaw is easy to handle, which reduces user fatigue during extended use. The comfort-grip handle allows for a secure hold, enhancing overall control and maneuverability. This is particularly beneficial for users who might be working in awkward positions or for long periods.

The Poulan 192087 is also equipped with a 18-inch bar and chain, which strikes a balance between cutting capacity and ease of use. This size is perfect for medium to large cutting tasks, providing sufficient reach without being unwieldy. The chain itself features low kickback technology, making it safer for novice users while still delivering high performance.

Maintenance is made simpler with the tool-less chain tensioning system, allowing users to adjust chain tightness easily and efficiently without needing additional tools. This feature, combined with an automatic oiling system, ensures that the chain remains in optimal condition, enhancing its lifespan and cutting efficiency.

Lastly, the Poulan 192087 showcases a durable build suitable for outdoor conditions. Its sturdy construction ensures reliability, even when exposed to the elements. These features combined make the Poulan 192087 a dependable choice for anyone in need of a powerful, effective, and user-friendly chainsaw, whether for professional landscaping or casual home use. With its blend of performance, comfort, and practicality, this chainsaw is a valuable addition to any toolkit.