Poulan 192087 To Remove Wheel for Repairs See Fig, To Start Engine with a Weak Battery See Fig

Page 22

SERVICE AND ADJUSTMENTS

TO REMOVE WHEEL FOR REPAIRS (See Fig. 22)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 22

TO START ENGINE WITH A WEAK BATTERY (See Fig. 23)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

 

02614

WEAK OR DEAD

FULLY CHARGED

BATTERY

BATTERY

FIG. 23

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model NO. PO17542STD Safety Rules Safety Rules Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig HOW to SET UP Your TractorCheck Battery See Fig Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingMuffler CleaningAIR Filter Spark PlugsTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Attach Jumper Cables To Start Engine with a Weak Battery See FigTo Remove Wheel for Repairs See Fig To Remove CABLES, Reverse OrderTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

192087 specifications

The Poulan 192087 is a powerful chainsaw designed for both professional and home use, showcasing a blend of reliability, performance, and user-friendly features. It is particularly well-suited for various cutting tasks, from felling trees to trimming branches and cutting firewood, making it a versatile tool in any outdoor toolkit.

One of the standout features of the Poulan 192087 is its robust engine. With a potent gas-powered engine, this chainsaw provides the necessary power and torque for tackling even the toughest jobs. The engine is designed for efficiency, delivering excellent cutting performance while maintaining lower fuel consumption. This makes it ideal for users who need to work on larger projects without the frequent need for refueling.

Another significant characteristic of the Poulan 192087 is its lightweight and ergonomic design. Weighing in at just over 10 pounds, this chainsaw is easy to handle, which reduces user fatigue during extended use. The comfort-grip handle allows for a secure hold, enhancing overall control and maneuverability. This is particularly beneficial for users who might be working in awkward positions or for long periods.

The Poulan 192087 is also equipped with a 18-inch bar and chain, which strikes a balance between cutting capacity and ease of use. This size is perfect for medium to large cutting tasks, providing sufficient reach without being unwieldy. The chain itself features low kickback technology, making it safer for novice users while still delivering high performance.

Maintenance is made simpler with the tool-less chain tensioning system, allowing users to adjust chain tightness easily and efficiently without needing additional tools. This feature, combined with an automatic oiling system, ensures that the chain remains in optimal condition, enhancing its lifespan and cutting efficiency.

Lastly, the Poulan 192087 showcases a durable build suitable for outdoor conditions. Its sturdy construction ensures reliability, even when exposed to the elements. These features combined make the Poulan 192087 a dependable choice for anyone in need of a powerful, effective, and user-friendly chainsaw, whether for professional landscaping or casual home use. With its blend of performance, comfort, and practicality, this chainsaw is a valuable addition to any toolkit.
Top Page Image Contents