Poulan 191641 To Convert to Bagging or Discharging, Reposition Right Rear Gauge Wheel, Checklist

Page 10

TO CONVERT TO BAGGING OR DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulching blades are designed for discharging and bagging also.

REPOSITION RIGHT REAR GAUGE WHEEL

For shipping purposes, the right rear gauge wheel assembly is mounted upside down on the mower. Remove the gauge wheel assembly and reinstall from the bottom as shown. To adjust gauge wheels, see the Operation section in this manual.

CHECK TIRE PRESSURE

The tires on your tractor were overin- flated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK DECK LEVELNESS

For best cutting results, mower hous- ing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist:

All assembly instructions have been completed.

No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

Seat is adjusted comfortably and tight- ened securely.

All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure and wires are properly clamped.

Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANSPORT” in the Operation section of this manual).

While learning how to use your tractor, pay extra attention to the following important items:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

Become familiar with all controls, their location and function. Operate them before you start the engine.

Be sure brake system is in safe operat- ing condition.

It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and trans- mission purging instructions (See “TO START ENGINE” and “PURGE TRANS- MISSION” in the Operation section of this manual).

10

Image 10
Contents Model NO. CO185H42STA Table of Contents WarrantyGeneral Operation Safety RulesII. Slope Operation III. Children IV. ServiceDo not Safety Rules Customer Responsibilities Product SpecificationsAPI-SG-SL Unassembled Parts To Remove Tractor from Carton Tools Required for AssemblyBefore Removing Tractor from Skid Install Mulcher Plate If previously removed Reposition Right Rear Gauge Wheel ChecklistTo Convert to Bagging or Discharging Check Tire PressureOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Operate MowerTo Transport Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Start Engine Check Engine OIL LevelMulching Mowing Tips Mowing TipsAutomatic Transmission Warm UP General Recommendations MaintenanceBefore Each USE Tractor Engine Service and Adjustments CleaningSIDE-TO-SIDE Adjustment To Install MowerTo Level Mower Housing FRONT-TO-BACK AdjustmentTo Replace Mower Blade Drive Belt To Check and Adjust BrakeTo Replace Motion Drive Belt To Start Engine with a Weak Battery Transaxle Motion Control LE- VER Neutral AdjustmentTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Fuel System BatteryOther Engine OILTroubleshooting Chart Problem Cause CorrectionExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation