Uniden PRO630XL owner manual Beep On/Off, Back Light

Page 24

UNIDEN Model PRO630XL

Operation

Beep On/Off

1.Press [MENU/ENTER] six times. The Beep setting flashes.

2.Turn the Rotary Channel Selector at the base to change the setting between ON or OFF.

3.Press [MENU/ENTER] to store the setting.

4.Press and hold [MENU/ENTER] to exit from the menu mode.

Back Light

1.Press [MENU/ENTER] seven times. The

Backlight setting flashes.

2.Turn the Rotary Channel Selector at the base to change the setting between OFF, LO and HI.

3.Press [MENU/ENTER] to store the setting.

4.Press and hold [MENU/ENTER] to exit from the menu mode.

24

Image 24

Contents OWNER’S1 Manual Contents Features IntroductionPreventive Maintenance TroubleshootingControls/Connectors PRO630XL Front ViewConnectors Standard Microphone Controls and Connectors Indicators PRO630XL LCD not to scale IndicatorsIncluded with your AM CB Radio Optional Accessories DIN-E Installation Mounting Using the DIN-E SleeveRemoving the PRO630XL from the DIN-E Sleeve Connecting the Microphone Disconnecting the MIC from the Front MIC JackFront MIC Jack Rear MIC JackMounting the MIC Hanger Conventional Mounting with ScrewsConventional Mounting with Double Sided Tape not supplied MIC Hanger mounted over MIC Cable Standard MicrophoneTurning on the Power Setting the Manual SquelchOperation Selecting a Channel Programming the Instant Priority Channel Recalling the Instant Priority ChannelTransmitting Call FunctionScanning Open Scan OS Mode Group Scan GS ModePriority Watch Add/Remove Channels from Scan MemoryVOX Operation optional VOX headset required Selecting the Call toneBusy Channel Lockout Roger BeepBeep On/Off Back LightKey Lock ANL Automatic Noise LimiterAM CB Channels & Frequencies 27.055Warranty Uniden PRO630XL AM CB Transceiver RadioUniden Australia Pty Limited/Uniden New Zealand Limited