Uniden owner manual Removing the PRO630XL from the DIN-E Sleeve

Page 12

UNIDEN Model PRO630XL

DIN-E Installation

Removing the PRO630XL from the DIN-E Sleeve

If you plan to use the Rear MIC Jack or connect an external speaker, at a later time, you should plan to remove the PRO630XL from the DIN-E sleeve. This is easily done using the provided Removal Keys.

Fully insert both Removal Keys straight into the slots on the left and the right edges of the radio’s dress panel. You cannot remove the radio if only one key is available.

Press in fully and the radio will unlock from the sleeve making withdrawal from the sleeve possible. Store the keys in a safe place for future use.

12

Image 12

Contents OWNER’S1 Manual Contents Features IntroductionPreventive Maintenance TroubleshootingControls/Connectors PRO630XL Front ViewConnectors Standard Microphone Controls and Connectors Indicators PRO630XL LCD not to scale IndicatorsIncluded with your AM CB Radio Optional Accessories DIN-E Installation Mounting Using the DIN-E SleeveRemoving the PRO630XL from the DIN-E Sleeve Connecting the Microphone Disconnecting the MIC from the Front MIC JackFront MIC Jack Rear MIC JackMounting the MIC Hanger Conventional Mounting with ScrewsConventional Mounting with Double Sided Tape not supplied MIC Hanger mounted over MIC Cable Standard MicrophoneTurning on the Power Setting the Manual SquelchOperation Selecting a Channel Programming the Instant Priority Channel Recalling the Instant Priority ChannelTransmitting Call FunctionScanning Open Scan OS Mode Group Scan GS ModePriority Watch Add/Remove Channels from Scan MemoryVOX Operation optional VOX headset required Selecting the Call toneBusy Channel Lockout Roger BeepBeep On/Off Back LightKey Lock ANL Automatic Noise LimiterAM CB Channels & Frequencies 27.055Warranty Uniden PRO630XL AM CB Transceiver RadioUniden Australia Pty Limited/Uniden New Zealand Limited