Poulan 187007 manual To Replace Mower Blade Drive Belt See Fig, To Check and Adjust Brake See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 18)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Disconnect R.H.suspension arm from rear deck bracket by removing retainer spring.

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Work new belt around both mandrel pulleys and idler pulleys.

•Install new belt into engine pulley grove.

•Reconnect R.H. suspension arm and secure with re- tainer spring.

•Make sure belt is in all pulley grooves and inside all belt guides.

MANDREL

IDLER

PULLEYS

PULLEY

ENGINE

 

 

PULLEY

 

R.H.

 

SUSPENSION

 

ARM

RETAINER

 

SPRING

 

MANDREL

 

PULLEY

 

FIG. 18

TO CHECK AND ADJUST BRAKE (See Fig. 19)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Place gear shift lever in neutral (N) position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

00238

FIG. 19

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model NO. PO13T38A Safety Rules IV. ServiceGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery See Fig HOW to SET UP Your TractorInstall Seat See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate on Hills To TransportTowing Carts and Other ATTACH- Ments Check Engine OIL LevelMowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemEngine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Adjust Steering Wheel ALIGN- Ment To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsTo Adjust Throttle Control Cable To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PO13T38AElectrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering Repair Parts Engine KEY Part NO. NO. Description Seat Decals Wheels & TiresMower Lift Repair Parts Mower Deck 178515 Service Notes Limited Warranty Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

187007 specifications

The Poulan 187007 is a powerful and reliable chainsaw designed for both residential and professional use. With its ergonomic design and advanced technology, it stands out in the competitive market of outdoor tools.

One of the key features of the Poulan 187007 is its robust engine. It is equipped with a 46cc two-stroke engine that delivers a significant amount of power, making it suitable for a variety of tasks such as tree trimming, firewood cutting, and storm cleanup. The engine's efficient design not only ensures high performance but also minimizes fuel consumption, allowing users to work longer without frequent refueling.

In terms of safety, the Poulan 187007 comes with several features designed to protect the user. The chainsaw is equipped with a chain brake that can be activated manually or automatically, reducing the risk of kickback injuries. Additionally, its anti-vibration technology helps to dampen the vibrations produced during operation, offering comfort to the user and reducing fatigue over extended periods of use.

The Poulan 187007 also boasts an easy-start system. This technology allows for smooth and effortless starting, which can be particularly beneficial when starting in cold weather or after long periods of inactivity. The tool’s adjustable oil flow system ensures that the chain remains lubricated, extending its lifespan and enhancing cutting efficiency.

Another noteworthy characteristic is its lightweight design. Weighing in at just under 13 pounds, the Poulan 187007 is easy to maneuver, making it a great option for both novice users and experienced professionals. The balanced weight distribution and comfortable handle grip further enhance the user experience, allowing for greater control while cutting.

Durability is a hallmark of the Poulan brand, and the 187007 is no exception. Constructed with high-quality materials, this chainsaw is designed to withstand the rigors of regular use. Whether tackling dense wood or engaging in lighter yard work, it is built to last.

In summary, the Poulan 187007 is an excellent addition to any toolbox, combining power, safety, and reliability. Its array of features makes it suitable for tackling various outdoor tasks, providing users with a dependable and efficient tool. For those looking for a versatile chainsaw, the Poulan 187007 is a model worth considering.
Top Page Image Contents