Poulan 187007 manual To Replace Motion Drive Belt See Fig, To Adjust Steering Wheel ALIGN- Ment

Page 21

SERVICE AND ADJUSTMENTS

TO REPLACE MOTION DRIVE BELT (See Fig. 20)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down between transaxle belt keepers and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 21)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

CENTER SPAN KEEPER

TRANSAXLE PULLEY

WASHERS

RETAINING RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 21

FIG. 20

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model NO. PO13T38A IV. Service Safety RulesGeneral Operation II. Slope OperationSafety Rules Table of Contents Steering Wheel Seat Unassembled PartsTools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidHOW to SET UP Your Tractor Install Seat See FigCheck Battery See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills To Transport Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelTo Start Engine See Fig Mowing TipsLubrication Chart MaintenanceGeneral Recommendations Before Each USEBrake Operation TractorTires Operator Presence SystemEngine Muffler CleaningSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigReplacing Battery See Figs To Start Engine with a Weak Battery See FigTo Adjust Carburetor To Adjust Throttle Control CableTo Replace Headlight Bulb Interlocks and RelaysOther StorageFuel System Engine OILTroubleshooting Points OFF Tractor - Model Number PO13T38A SchematicElectrical KEY Part Description Chassis Repair Parts Drive KEY Part NO. NO. Description Steering Repair Parts Engine KEY Part NO. NO. Description Seat Wheels & Tires DecalsMower Lift Repair Parts Mower Deck 178515 Service Notes Limited Warranty Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

187007 specifications

The Poulan 187007 is a powerful and reliable chainsaw designed for both residential and professional use. With its ergonomic design and advanced technology, it stands out in the competitive market of outdoor tools.

One of the key features of the Poulan 187007 is its robust engine. It is equipped with a 46cc two-stroke engine that delivers a significant amount of power, making it suitable for a variety of tasks such as tree trimming, firewood cutting, and storm cleanup. The engine's efficient design not only ensures high performance but also minimizes fuel consumption, allowing users to work longer without frequent refueling.

In terms of safety, the Poulan 187007 comes with several features designed to protect the user. The chainsaw is equipped with a chain brake that can be activated manually or automatically, reducing the risk of kickback injuries. Additionally, its anti-vibration technology helps to dampen the vibrations produced during operation, offering comfort to the user and reducing fatigue over extended periods of use.

The Poulan 187007 also boasts an easy-start system. This technology allows for smooth and effortless starting, which can be particularly beneficial when starting in cold weather or after long periods of inactivity. The tool’s adjustable oil flow system ensures that the chain remains lubricated, extending its lifespan and enhancing cutting efficiency.

Another noteworthy characteristic is its lightweight design. Weighing in at just under 13 pounds, the Poulan 187007 is easy to maneuver, making it a great option for both novice users and experienced professionals. The balanced weight distribution and comfortable handle grip further enhance the user experience, allowing for greater control while cutting.

Durability is a hallmark of the Poulan brand, and the 187007 is no exception. Constructed with high-quality materials, this chainsaw is designed to withstand the rigors of regular use. Whether tackling dense wood or engaging in lighter yard work, it is built to last.

In summary, the Poulan 187007 is an excellent addition to any toolbox, combining power, safety, and reliability. Its array of features makes it suitable for tackling various outdoor tasks, providing users with a dependable and efficient tool. For those looking for a versatile chainsaw, the Poulan 187007 is a model worth considering.
Top Page Image Contents