Poulan 178500 owner manual Tools Required for Assembly, To Remove Tractor from Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)

Tire pressure gauge

(1)

Pliers

(1)

9/16" wrenches

(1)

Utility knife

(1)

1/2" wrench

(1) 3/4" socket w/drive ratchet

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

Remove all accessible loose parts and parts cartons from carton.

Cut, from top to bottom, along lines on all four corners of carton, and lay panels flat.

Remove mower and packing materials.

Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

Remove hex bolt, lock washer and large flat washer from steering shaft.

Position front wheels of the tractor so they are pointing straight forward.

Slide the steering sleeve over the steering shaft.

Align tabs and press steering sleeve extension into bottom of steering wheel.

Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

Secure steering wheel to steering shaft with hex bolt, lock washer and large flat washer previously removed. Tighten securely.

Snap steering wheel insert into center of steering wheel.

Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

STEERING WHEEL

INSERT

HEX BOLT

LOCK WASHER

LARGE FLAT WASHER

STEERING WHEEL

STEERING

WHEEL

ADAPTOR

TABS

STEERING

SLEEVE EXTENTION

STEERING

SHAFT

STEERING

SLEEVE

FIG. 1

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY (See Fig. 2)

Lift hood to raised position.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Customer Responsibilities section of this manual for charging instructions).

LABEL

FIG. 2

6

Image 6
Contents PRGT2046B General Operation Safety RulesIV. Service II. Slope OperationSafety Rules Safe Operation Practices for Ride-On MowersTable of Contents Contents of Hardware Pack HOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs To SET UP Your Mower for Mulching See FigInstall Mulcher Plate See Fig To Convert to Bagging or DischargingCheck for Proper Position of ALL Belts Check Tire PressureCheck Mower Levelness Check Brake SystemOperation Height Adjustment Knob Used to adjust the mower height Know Your TractorHOW to USE Your Tractor To Transport To Adjust Gauge Wheels See FigTo Operate on Hills To Operate Mower See FigCheck Engine OIL Level Before Starting the EngineMowing Tips ADD GasolineMulching Mowing Tips Provide the best recutting action of the bladesGeneral Recommendations Service DatesCustomer Responsibilities Before Each USETractor Belts Clean AIR ScreenEngine Transaxle CoolingEngine OIL Filter CleaningClean AIR INTAKE/COOLING Areas MufflerTo Level Mower Housing Service and AdjustmentsTo Install Mower To Remove Mower See FigTo Replace Mower Drive Belt To Replace Mower Blade Drive Belt See FigBelt Installation To Adjust Attachment Clutch See FigTo Adjust Brake See Fig To Replace Motion Drive Belt See FigFront Wheel Camber To Adjust Steering Wheel AlignmentFront Wheel TOE-IN Adjustment To Remove Wheel for RepairsTo Replace Headlight Bulb Interlocks and RelaysTo Replace Fuse To Adjust Throttle Control Cable See Fig To Remove Hood and Grill Assembly See FigTo Adjust Carburetor To Adjust Choke Control See FigFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor - Model Number PRGT2046BElectrical KEY Part Description 178861Chassis and Enclosures 175289X428 175282177679 177956Ground Drive 117 4855 150 61567563R Washer, Thrust, Axle 150035 NylinerSteering Assembly 137347 137156Engine 177748 175437X428175440X428 Seat Assembly KEY Part NO. NO.DESCRIPTION178500 DecalsWheels & Tires 178501Lift Assembly 175805 175560175689 Mower Deck 174493 178342Transaxle Repair Parts Service Notes Service Notes Limited Warranty Sighting Guide CUT This OUT Dotted Is a SlopeParts and Service

178500 specifications

The Poulan 178500 is a powerful and versatile string trimmer that caters to the needs of both professional landscapers and homeowners looking for an efficient lawn maintenance tool. Known for its robust design and user-friendly features, the Poulan 178500 stands out in the market of outdoor power equipment.

One of the main features of the Poulan 178500 is its potent 17cc, 2-cycle engine. This engine delivers a strong performance, allowing users to tackle tough grass, weeds, and overgrown areas with ease. The 2-cycle technology ensures that the trimmer is not only powerful but also lightweight, making it easier to maneuver during extended use. Users will benefit from a balanced weight distribution, which minimizes user fatigue.

Equipped with a dual-line cutting head, the Poulan 178500 ensures efficient cutting performance. The dual-line system offers a wider cutting path, enabling greater coverage with each pass. This feature is especially beneficial for larger yards or heavily landscaped areas, as it reduces the time spent on trimming tasks. Additionally, the trimmer utilizes a bump-feed line advancement system, allowing users to easily release more line with a simple tap on the ground, keeping productivity high without interruptions.

The ergonomic design of the Poulan 178500 enhances user comfort and usability. It boasts cushioned grips that reduce vibration and improve handling. Furthermore, the adjustable handle allows users to customize the position for optimal control, making trimming at various angles easier and more efficient.

Another remarkable characteristic of the Poulan 178500 is its ease of starting. The trimmer is equipped with a simplified starting mechanism, minimizing the effort required to get the engine running. This feature is particularly advantageous for those who may struggle with traditional starting methods.

For added convenience, the Poulan 178500 features a lightweight frame, making it one of the more portable options in the string trimmer market. This ease of transport and storage ensures that users can easily move from one area of their property to another without hassle.

In summary, the Poulan 178500 is a high-performance string trimmer that merges power, comfort, and user-friendly technology. Its robust engine, dual-line system, ergonomic design, and easy starting mechanism make it an excellent choice for anyone seeking a reliable and efficient lawn maintenance tool. Whether for professional landscaping or routine yard care, the Poulan 178500 is built to meet diverse trimming demands while delivering excellent results.