Poulan PRK17H42STA To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills

Page 12

OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

•Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

3/8-16

LOCKNUT

GUAGE WHEEL

 

MOUNTING

 

BRACKET

SHOULDER

3/8 WASHER

BOLT

 

GAUGE WHEEL

 

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION ATTACHMENT LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT

DEFLECTOR

CLUTCH LEVER

SHIELD

"DISENGAGED"

 

POSITION

 

FIG. 8

12

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 5 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attach- ment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

FIG. 9

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PRK17H42STA Safety Rules Safe Operation Practices for Ride-On MowersSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatSlope Sheet Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonGet off seat without moving its adjusted position To SET UP Your Mower for Mulching Check Tire PressureCheck Deck Levelness To Convert to Bagging or DischargingOperation Know Your Tractor HOW to USE Your Tractor To Adjust Mower Cutting Height See Fig Stopping See FigTo SET Parking Brake See Fig To USE Throttle Control See FigTo Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL Level See FigADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsLubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Engine Clean AIR INTAKE/COOLING Areas CleaningMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Level Mower Housing To Remove Mower See FigTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Start Engine with a Weak Battery See Fig Replacing Battery SeeTo Replace Headlight Bulb Interlocks and RelaysTo Remove Hood and Grill Assembly See Fig To Adjust Throttle Control Cable See FigTo Adjust Carburetor See Fig Acceleration TestStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PRK17H42STAElectrical KEY Part Description Chassis Screw Hex Wshd 8-18 x 7/8 Drive Transaxle Hydro Gear Steering Assembly KEY Part NO. NO.DESCRIPTION Seat Assembly Decals Wheels and TiresEngine 170805 Control Th/ch Flag Mower Deck Tractor - Model Number PRK17H42STA Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Service Notes Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideParts and Service

PRK17H42STA specifications

The Poulan PRK17H42STA is a robust riding lawn mower designed for residential mowing tasks, blending efficiency with a user-friendly experience. This mower is powered by a reliable 17 HP Briggs & Stratton engine, known for its durability and performance. The engine provides ample power to tackle various grass and terrain types, making it ideal for medium to large yards.

One of the standout features of the PRK17H42STA is its 42-inch cutting deck. This deck size strikes an excellent balance between maneuverability and coverage, allowing users to navigate around obstacles with ease while still covering a substantial area in a single pass. The cutting height can be easily adjusted to ensure that your lawn is maintained to the desired length, accommodating different grass types and seasonal growth patterns.

The Poulan PRK17H42STA incorporates a manual drive system with a foot-operated hydrostatic transmission. This feature allows for smooth speed adjustments without the need for clutching or shifting gears, making it easier for users to focus on mowing without distractions. The comfortable high-back seat adds to the overall riding experience, providing support during longer mowing sessions.

In terms of design, the mower has a durable construction built to withstand regular use. Its solid frame and robust components contribute to longevity, ensuring that it can handle the rigors of residential mowing. The machine is equipped with easy-access maintenance points, making it simple to perform routine checks and service.

Another significant feature of the PRK17H42STA is its capability to attach various accessories, including mulching kits and baggers. This versatility allows homeowners to customize their mowing experience and manage grass clippings effectively. The incorporation of safety features such as a blade brake that stops the blades when the driver leaves the seat enhances user safety.

Overall, the Poulan PRK17H42STA is an excellent choice for homeowners seeking a reliable and efficient riding mower. With its powerful engine, adjustable cutting deck, and comfortable riding experience, it is a valuable asset for proper lawn maintenance. Whether you have a small or moderately-sized lawn, this mower is designed to meet your needs, making it a commendable addition to any outdoor maintenance arsenal.
Top Page Image Contents