Poulan PRK17H42STA owner manual Clean AIR INTAKE/COOLING Areas, Muffler, Spark Plugs, Cleaning

Page 18

CUSTOMER RESPONSIBILITIES

CLEAN AIR INTAKE/COOLING AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

AIR FILTER (See Fig. 15)

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

Remove knob and cover.

Remove wing nut and air cleaner from base.

TO SERVICE PRE-CLEANER

Slide foam pre-cleaner off cartridge.

Wash it in liquid detergent and water.

Squeeze it dry in a clean cloth. Allow it to dry.

Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

TO SERVICE CARTRIDGE

Replace a dirty, bent, or damaged cartridge.

NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge.

Reinstall the pre-cleaner (cleaned and oiled) over the paper cartridge.

Reassemble air cleaner, wing nut, cover and tighten knob securely.

AIR CLEANER

COVER KNOB

WING NUT

COVER

FOAM

PRE-CLEANERRUBBER GROMMET

AIR CLEANER

AIR CLEANER

BASE

PAPER CAR-

TRIDGE

OIL FILL CAP/

 

DIPSTICK

AIR

SCREEN

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 16)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

With engine cool, remove filter and plug fuel line sec- tions.

Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

Be sure there are no fuel line leaks and clamps are properly positioned.

Immediately wipe up any spilled gasoline.

CLAMP

CLAMP

FUEL

FILTER

FIG. 16

CLEANING

Clean engine, battery, seat, finish, etc. of all foreign matter.

Keep finished surfaces and wheels free of all gasoline, oil, etc.

Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in a shortened engine life.

FIG. 15

18

Image 18
Contents PRK17H42STA Safety Rules Safe Operation Practices for Ride-On MowersSafety Rules Table of Contents Unassembled Parts Steering Wheel SeatSlope Sheet HOW to SET UP Your Tractor AssemblyTools Required for Assembly To Remove Tractor from CartonGet off seat without moving its adjusted position Check Deck Levelness To SET UP Your Mower for MulchingCheck Tire Pressure To Convert to Bagging or DischargingOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorTo Adjust Mower Cutting Height See Fig Stopping See Fig To USE Throttle Control See FigTo Operate on Hills To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Transport See FigsADD Gasoline Before Starting the EngineCheck Engine OIL Level See Fig To Start Engine See FigMowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartCustomer Responsibilities Before Each USETractor Engine Muffler Clean AIR INTAKE/COOLING AreasCleaning Spark PlugsTo Level Mower Housing Service and AdjustmentsTo Install Mower See Fig To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig To Adjust Brake See FigBelt Installation Belt RemovalTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Replace Headlight Bulb To Start Engine with a Weak Battery See FigReplacing Battery See Interlocks and RelaysTo Adjust Carburetor See Fig To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable See Fig Acceleration TestFuel System StorageOther Engine OILTroubleshooting Points OFF Schematic Tractor - Model Number PRK17H42STAElectrical KEY Part Description Chassis Screw Hex Wshd 8-18 x 7/8 Drive Transaxle Hydro Gear Steering Assembly KEY Part NO. NO.DESCRIPTION Seat Assembly Decals Wheels and TiresEngine 170805 Control Th/ch Flag Mower Deck Tractor - Model Number PRK17H42STA Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Service Notes Service Notes Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideParts and Service

PRK17H42STA specifications

The Poulan PRK17H42STA is a robust riding lawn mower designed for residential mowing tasks, blending efficiency with a user-friendly experience. This mower is powered by a reliable 17 HP Briggs & Stratton engine, known for its durability and performance. The engine provides ample power to tackle various grass and terrain types, making it ideal for medium to large yards.

One of the standout features of the PRK17H42STA is its 42-inch cutting deck. This deck size strikes an excellent balance between maneuverability and coverage, allowing users to navigate around obstacles with ease while still covering a substantial area in a single pass. The cutting height can be easily adjusted to ensure that your lawn is maintained to the desired length, accommodating different grass types and seasonal growth patterns.

The Poulan PRK17H42STA incorporates a manual drive system with a foot-operated hydrostatic transmission. This feature allows for smooth speed adjustments without the need for clutching or shifting gears, making it easier for users to focus on mowing without distractions. The comfortable high-back seat adds to the overall riding experience, providing support during longer mowing sessions.

In terms of design, the mower has a durable construction built to withstand regular use. Its solid frame and robust components contribute to longevity, ensuring that it can handle the rigors of residential mowing. The machine is equipped with easy-access maintenance points, making it simple to perform routine checks and service.

Another significant feature of the PRK17H42STA is its capability to attach various accessories, including mulching kits and baggers. This versatility allows homeowners to customize their mowing experience and manage grass clippings effectively. The incorporation of safety features such as a blade brake that stops the blades when the driver leaves the seat enhances user safety.

Overall, the Poulan PRK17H42STA is an excellent choice for homeowners seeking a reliable and efficient riding mower. With its powerful engine, adjustable cutting deck, and comfortable riding experience, it is a valuable asset for proper lawn maintenance. Whether you have a small or moderately-sized lawn, this mower is designed to meet your needs, making it a commendable addition to any outdoor maintenance arsenal.