Poulan PRK17H42STA owner manual Get off seat without moving its adjusted position

Page 7

ASSEMBLY

SEAT PAN

LABEL

BATTERY

BOX DOOR

TERMINAL

TERMINAL

FIG. 2

3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheeling position to disengage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" po- sition.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

• Raise seat and tighten adjustment knob securely.

• Place motion control lever in neutral (N) position.

 

• Press lift lever plunger and raise attachment lift lever to

 

 

its highest position.

SEAT

• Start the engine. After engine has started, move throttle

 

 

control to idle position.

 

•

Release parking brake.

 

• Slowly move the motion control lever forward and slowly

 

 

drive tractor off skid.

SEAT PAN

• Apply brake to stop tractor, set parking brake and place

 

 

motion control lever in neutral position.

 

• Turn ignition key to "OFF" position.

SHOULDER

Continue with the instructions that follow.

BOLT

 

 

FLAT WASHER

 

 

ADJUSTMENT

 

 

KNOB

 

 

FIG. 3

7

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PRK17H42STA Safe Operation Practices for Ride-On Mowers Safety RulesSafety Rules Table of Contents Steering Wheel Seat Unassembled PartsSlope Sheet To Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorGet off seat without moving its adjusted position To Convert to Bagging or Discharging To SET UP Your Mower for MulchingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor To USE Throttle Control See Fig HOW to USE Your TractorTo Adjust Mower Cutting Height See Fig Stopping See Fig To SET Parking Brake See FigTo Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level See Fig ADD GasolineMulching Mowing Tips Mowing TipsBefore Each USE Lubrication ChartCustomer Responsibilities General RecommendationsTractor Engine Spark Plugs Clean AIR INTAKE/COOLING AreasCleaning MufflerTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower HousingBelt Removal To Adjust Brake See FigBelt Installation To Replace Mower Blade Drive Belt See FigTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER Interlocks and Relays To Start Engine with a Weak Battery See FigReplacing Battery See To Replace Headlight BulbAcceleration Test To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable See Fig To Adjust Carburetor See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PRK17H42STA SchematicElectrical KEY Part Description Chassis Screw Hex Wshd 8-18 x 7/8 Drive Transaxle Hydro Gear Steering Assembly KEY Part NO. NO.DESCRIPTION Seat Assembly Wheels and Tires DecalsEngine 170805 Control Th/ch Flag Mower Deck Tractor - Model Number PRK17H42STA Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Service Notes Service Notes Limited Warranty Sighting Guide Suggested Guide for Sighting Slopes for Safe OperationParts and Service

PRK17H42STA specifications

The Poulan PRK17H42STA is a robust riding lawn mower designed for residential mowing tasks, blending efficiency with a user-friendly experience. This mower is powered by a reliable 17 HP Briggs & Stratton engine, known for its durability and performance. The engine provides ample power to tackle various grass and terrain types, making it ideal for medium to large yards.

One of the standout features of the PRK17H42STA is its 42-inch cutting deck. This deck size strikes an excellent balance between maneuverability and coverage, allowing users to navigate around obstacles with ease while still covering a substantial area in a single pass. The cutting height can be easily adjusted to ensure that your lawn is maintained to the desired length, accommodating different grass types and seasonal growth patterns.

The Poulan PRK17H42STA incorporates a manual drive system with a foot-operated hydrostatic transmission. This feature allows for smooth speed adjustments without the need for clutching or shifting gears, making it easier for users to focus on mowing without distractions. The comfortable high-back seat adds to the overall riding experience, providing support during longer mowing sessions.

In terms of design, the mower has a durable construction built to withstand regular use. Its solid frame and robust components contribute to longevity, ensuring that it can handle the rigors of residential mowing. The machine is equipped with easy-access maintenance points, making it simple to perform routine checks and service.

Another significant feature of the PRK17H42STA is its capability to attach various accessories, including mulching kits and baggers. This versatility allows homeowners to customize their mowing experience and manage grass clippings effectively. The incorporation of safety features such as a blade brake that stops the blades when the driver leaves the seat enhances user safety.

Overall, the Poulan PRK17H42STA is an excellent choice for homeowners seeking a reliable and efficient riding mower. With its powerful engine, adjustable cutting deck, and comfortable riding experience, it is a valuable asset for proper lawn maintenance. Whether you have a small or moderately-sized lawn, this mower is designed to meet your needs, making it a commendable addition to any outdoor maintenance arsenal.
Top Page Image Contents