Poulan ES300 instruction manual Double Insulation Construction, Carton Contents, Assembly

Page 6

Computed kickback angle (CKA) Table

MODEL

BAR

 

CHAIN P/N

CKA

P/N

 

Length

ES300

952044758

 

14!

952051469

20_

SAFETY NOTICE: Exposure to vibra- tions through prolonged use of hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swelling. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration sys- tem does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must closely monitor their physical condition and the condition of this tool.

DOUBLE INSULATION

CONSTRUCTION

This unit is double insulated to help pro- tect against electric shock. Double in- sulation construction consists of two separate “layers” of electrical insulation instead of grounding.

Tools built with this insulation system are not intended to be grounded. No grounding means is provided on this unit, nor should a means of grounding be added to this unit.

Safety precautions must be observed when operating any electrical tool. The

double insulation system only provides added protection against injury resulting from an internal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, motor, etc., must be diagnosed and repaired by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words “double insulation” or “double insulated”. The symbol (square within a square) may also be marked on the appliance. Failure to have the unit repaired by authorized service personnel can cause the double insula- tion construction to become ineffective and result in serious injury. STANDARDS: This product is listed by Underwriters Laboratories, Inc. in accor- dance with UL Standard 1662 and CSA Standards Z62.1 and Z62.3 and ANSI B175.1.

ANSI B175.1-2000“American National Standard for Powered Tools -- Safety Re- quirements”

CSA Z62.3 “Chain Saw Kickback Occu- pational Health and Safety”

CSA Z62.1 “Chain Saws -- Occupational Health and Safety”

SAVE THESE INSTRUCTIONS

CARTON CONTENTS

Check carton contents against the fol- lowing list.

SChain Saw (fully assembled) S Bar Sheath

Examine parts for damage. Do not use damaged parts.

NOTE: If you need assistance or find that parts are missing or damaged, please call 1-800-554-6723.

ASSEMBLY

Your unit is fully assembled; no assembly is required.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Cut is completed Plan AheadOperate Your SAW Safely Chain to the rearElectrical Safety Guard Against Kickback Reduce the Chance KickbackMaintain Control Kickback Safety Features EratorCarton Contents AssemblyDouble Insulation Construction Trigger LOCK-OUT Button Power Cord Trigger Switch BAR OIL CAPChain Adjustment Screw Know Your SAWStarting Your SAW Guide BAR and Chain OILStopping Your SAW Operating TipsCutting a Fallen Tree Bucking Felling Large TreesNotch CUT and Felling Tree Important PointsLimbing and Pruning Important Points Bucking Using a LOG or Support StandBucking Without a Support LimbingGeneral Recommendations PruningCustomer Responsibilities Check for Damaged or Worn PartsCheck Chain Sharpness Check Chain TensionCheck Guide BAR LubricationLubricate bar sprocket hole after each use Inspect and Clean Unit and LabelsChain Replacement Chain SharpeningChain Adjustment Customer Serviceable PartsSeasonal Storage Repair or replace Troubleshooting Table Cause RemedySwitch is Trigger switch failure Sprocket wornElectrolux Home Products LUX Home PRODUCTS, INC
Top Page Image Contents