Poulan 115327926, P3816, 966557801 Kickback Safety Features, Chain Brake and CKA Angle

Page 5

KICKBACK SAFETY FEATURES

WARNING: The following features are included on your saw to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a chain saw user, do not rely only on safety de- vices. You must follow all safety precau- tions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered

chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

 

Can Obstruct Material

Not a Low--- Kickback Chain

SFront Hand Guard, designed to reduce the chance of your left hand contacting the chain if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

CHAIN BRAKE AND CKA ANGLE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICK- BACK. Kickback is a lightning fast action which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the op- erator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a servic- ing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light-

ning fast reverse REACTION, kicking guide bar up and back toward operator.

SPinching the saw chain along the top of the

guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA (Cana- dian Standards Association) and ANSI stan- dards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values repre- sent safer angles to the user, higher values in- dicate more angle and higher kick energies. Computed angles represented indicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain break and resulting kick angle of saw. In all cases lower CKA val- ues represent a safer operating environment for the user.

The following guide bar and chain combina- tions meet kickback requirements of CSA Standards Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InChain saws as set by Ansi B175.1 Kickback Safety FeaturesChain Brake and CKA Angle Ansi B175.1-2000 American National AssemblyAttaching the BAR & Chain If not Checking the tension Adjusting the tensionChain Tension Operation BAR and Chain Lubrication Before Starting Engine Fueling EngineFuel Requirements Starting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Kickback occursInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesCutting a Fallen Tree Notch CUT and Felling the TreeImportant Points Types of Cutting Used for BuckingBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark ARREST- ING Screen Check Fuel Mixture LevelReplace Spark Plug Chain AdjustmentTo Sharpen Chain Replace Fuel FilterStorage Carburetor AdjustmentCooling System Seasonal StorageEngine Load Adjustment EngineOther Empty fuel tank and refill withLigations The U.S. Environmental Canada, contactPoulan

115327926, P3816, 966557801 specifications

The Poulan P3816 chainsaw, model number 966557801, is a robust and efficient tool designed to meet the needs of both novice users and seasoned professionals. Known for its cutting performance and user-friendly design, this chainsaw is ideal for various tasks, including pruning, tree felling, and firewood cutting.

One of the standout features of the Poulan P3816 is its powerful 38cc engine. This 2-cycle engine provides the necessary torque and speed to tackle tough cutting jobs efficiently. Additionally, it is designed with an easy-start system that minimizes the effort required to start the chainsaw, making it accessible for users of all skill levels. The engine also incorporates advanced technology to reduce emissions, making it environmentally friendly while still delivering impressive power.

The P3816 features a 16-inch bar with a low-profile chain, allowing for smoother cuts and reduced kickback, which enhances user safety. The chain is specially engineered for durability and longevity, ensuring that users can rely on it for recurring tasks without frequent replacements. Moreover, the chainsaw offers tool-less chain tensioning, allowing users to quickly adjust the chain without the need for additional tools, which contributes to operational efficiency.

Comfort is a critical consideration in the design of the Poulan P3816. It comes with an ergonomic handle that reduces vibrations during operation, providing a more comfortable grip for extended periods. The lightweight design, coupled with the well-balanced construction, allows for easier maneuverability and reduced fatigue.

In terms of maintenance, the chainsaw is equipped with an automatic oiling system that ensures consistent lubrication of the chain and bar. This feature helps prolong the life of the tool and enhances cutting performance. The transparent oil reservoir allows users to easily check the oil level, ensuring they are always prepared for their tasks.

In summary, the Poulan P3816, with model number 966557801, is engineered for versatility and ease of use. Its powerful engine, user-friendly features, and safety-oriented design make it an excellent choice for anyone in need of a reliable chainsaw. Whether you are a homeowner looking to maintain your property or a professional using it for daily jobs, the P3816 stands out as a dependable tool that combines performance with convenience.
Top Page Image Contents