Safety Regulations
IMPORTANT: This equipment incorporates high-voltage components. Adequate safeguards and interloc ks
have been designed into this equipment to reduce the risk of injury during normal operation.
As with any electrical equipment of this kind, adequate ventilation must be prov ided to
minimize exposure to heat, dust, ozone, and other emissions. The followi ng labels will be
found on the product. The exclamation point symbol (A) indicates that the user should refer
to this guide for safety information. The hot symbol (B) indicates a hot surface area on the
printer that should not be touched. The electrical hazard/shock warning symb ol (C)
identifies the possibility of electrical shock inside an area that shou ld only be accessed by
Kodak CES personnel.
CAUTION: Before connecting or disconnecting the SCSI cable or terminator, turn off the power
for the printer and the host computer. Also, if you replace the SCSI cable, remove the
Ferrite bead from the existing SCSI cable and install it on the new SCSI cable.
A B C