![](/images/new-backgrounds/1197974/19797441x1.webp)
2 Using the System
This chapter explains how to use the KODAK PROFESSIONAL RP 50 LED Printer and Processor for daily operations. It takes you from startup to shutdown. Topics include:
Starting up the Processor | |
Starting up the Printer | |
Calibrating the Printer | |
Obtaining Densities | |
Completing the Calibration | |
Making Prints | |
Shutting Down the Processor | |
Shutting Down the Printer |
Starting up the Processor
1. Check that the circuit breaker switch for the processor is turned on.
circuit breaker switch
2.Press On/Off on the processor’s Operator Control Panel to turn the processor on.
The light above the On/Off key indicates the processor state. A blinking light indicates that the processor is on but the chemicals are not yet at the correct working temperature. A continuous light indicates that the processor is ready.
October 2002 |