System Operating Procedures
Reaching the End of the Roll of Paper
When the end of the roll of paper is reached, the OCP displays one of two messages:
•“Out of paper, open supply door to load...” — indicates that the supply cassette is empty. To remove the paper, open the supply door and pull the paper out of the shoe.
•“End of roll, remove sheet from sheet transport” — indicates that the supply cassette is empty. In this situation, the paper cannot be reversed into the roll supply area since the trail edge of the paper has moved into the shoe. The remaining paper is then moved forward into the sheet transport area with the lead edge of the paper just beyond the knife. To remove the paper, grasp its lead edge and pull it out of the shoe.
NOTE: If necessary, gently push the deflector down and use the shoe exit roller knob to advance the paper into the chad area.
deflector
paper
shoe exit roller knob
October 2002 |
