Kodak 2J0686 manual Using This Guide, System Operating Procedures- provides an overview

About This Guide

This is an Operator’s Guide for the KODAK PROFESSIONAL RP 50 LED Printer and Processor.

It provides step-by-step instructions for the operations you perform while using the Printer and Processor as a system. It also includes procedures and information for operating, maintaining, troubleshooting, and calibrating the system.

Also included in this guide are instructions for installing and using the various software packages needed.

This guide is intended for personnel who operate this system. It assumes that you can perform basic computer operations. MACINTOSH and

WINDOWS NT Platforms are supported in this guide.

This document also applies to the KODAK PROFESSIONAL LED II Printer 20P and Processor.

Using This Guide

This guide is organized as follows:

Chapter 1	Introduction—describes and illustrates the KODAK
	PROFESSIONAL RP 50 LED Printer and Processor. This
	chapter includes general and introductory information for all
	of the equipment.
Chapter 2	Using the System—explains how to use the printer and
	processor. It includes the step-by-step instructions for daily
	operation, from startup to shutdown.
Chapter 3	System Operating Procedures—provides an overview of
	the OCPs and all procedures for operating both the Printer
	and the Processor.
Chapter 4	Maintaining the Equipment—includes the information that
	you need to properly maintain the printer and processor. All
	maintenance procedures are categorized by frequency.
Chapter 5	Diagnostics and Troubleshooting—provides an error
	code listing, solutions to common operational problems for
	the printer, processor and calibration. It also provides
	information for obtaining additional help.
Appendix A	Ordering Equipment, Accessories, and Supplies—
	provides ordering information for many associated items. It
	includes information such as size, quantities, and catalog
	numbers.

October 2002 xiii